Lamps used on Daewoo Matiz

Are the headlights on your Daewoo Nexia bad? Everything is solvable

Many owners of Korean automotive products notice that the headlights on the Daewoo Nexia do not shine well.
There are not many reasons for this shortcoming. Experts assure that it is possible to cope with this problem on your own, but this will require finding out the true factors of the deficiency, and then eliminating the identified malfunction. Novice drivers who do not have at least minimal experience and knowledge of the internal structure of individual components and assemblies are recommended to contact professionals at the nearest service center.

How to choose the right lamps?

The Matiz headlights, as noted above, use standard H4 light sources with a power of 60/55 W, designed for an operating voltage of 12V and used in many other Daewoo car models. You can find them in almost any auto parts store. However, when purchasing, you should pay attention to several important aspects:

1. Bulbs from a specific company must be certified by the car manufacturer, which is usually indicated on the packaging;
2. The power of the lamps must fully correspond to that for the car model in question;
3. The light bulb should not have noticeable damage and be in its original packaging with appropriate protection (usually a holographic sticker).

Headlight adjustment

Are the headlights on your Daewoo Nexia bad? This means that immediate elimination of this deficiency is required, since good visibility on the night road is one of the keys to traffic safety. One of the reasons affecting the operation of automotive lighting elements is their correct adjustment.

On Nexia, released before 2008

, adjustments are made using adjusting screws using a screwdriver until the optimal value is achieved. On models manufactured after this period, adjustment is made with a key set to “10” by rotating the screws located on the back side of the light element.

Other causes and solutions

One of the factors that the headlights on the model in question do not light well is weak wiring. To solve this problem, it is reasonable to power the lighting system through a separate relay.

The sequence of work in a specific example consists of the following operations:

• Check the voltage at the battery terminals after stopping the engine (12.6 V);
• A similar indicator is read at the headlight connector (10.4 V);
• There is an obvious difference of 2 volts (if you change it back to halogen headlights, the lighting will improve significantly).

To install separate wiring, you will need two copies of a 4-pin relay (30 A), 2 blocks, about 5 meters of wire with a diameter of 2.5 sq. mm. The power contact of the relay should be secured to the safety element using the soldering method. The remaining ends are soldered to the positive of the battery. The relay wires are connected to each other, the remaining parts are extended and attached to the low and high beam lighting system.

A bundle of 600 mm for the left headlight and 1800 mm for the right element is attached to the contacts of both relays by soldering. All connections are carefully insulated. Power comes directly from the battery. The ground is connected to any bolt, and the wiring is connected specifically to the lamp connectors. Installation is carried out using plastic ties to securely secure the wiring. For convenience of work, it is recommended to disconnect and remove the battery before starting work.

Also, car headlights may shine poorly if the contacts oxidize.

. In this case, cleaning the last elements with fine sandpaper and treating with a special compound will help. If the reason for the weak light of the lanterns lies in an incorrectly selected lamp, an alternative option should be installed according to the characteristics specified in the operating instructions.

Daewoo Nexia headlight design

Early Nexias have block-type headlights, consisting of a lamp with two filaments for short-range and long-range. There is also a light indicator and turning lights. Generations of cars produced after 2008 are equipped with updated headlights with an improved design. In them, lamps of different range modes are installed separately.

The need to adjust the headlights of the car model in question arises mainly after repairs or any work has been carried out on them. As practice shows, even minor interference with the operation of lighting devices can disrupt their settings. Adjustment will also be required if the headlights on the Daewoo Nexia do not shine well when purchasing a used car. Having studied the main reasons for the poor performance of lighting fixtures and repair technology, it is quite possible to correct this problem yourself.

What kind of oil should be poured into Hyundai Solaris

Published: April 29, 2018
Spread the love

Spread the love What oil to pour into the Hyundai Solaris 1.6 and 1.4? Contents1 What oil to pour into the Hyundai Solaris 1.6 and 1.4?1.1 The principle of choosing oil for a Hyundai Solaris car1.2 Tolerances of Solaris oil1.2.1 The main stages of choosing oil for Solaris.1.2.2 HTHS1. 2.3 Pitfalls HTHS1.2.3.1 5W-30 oils for Hyundai Solaris1.2.3.2 5W-40 oils for Hyundai Solaris1.2.3.3 5W 20 oils for Hyundai Solaris1.3 […]

What to do if there is bad light on Nexia N150

One of the sores on the Nexia, in addition to the weak ignition contact group, is, of course, the low beam. To be more precise, on Nexias, low beam is almost completely absent. What to do if there is bad light on the Nexia n150 we will answer in this article.

To overcome poorly luminous headlights, you can choose any of the listed options or combine them. Bad light on Nexia? Everything is solvable!

Try something from the list above and the headlights on your Nexia will shine better than before.

Install xenon . On the Nexia n150, installing xenon in the low beam is much easier, since the headlights already have lenses. Xenon will shine better, but there are disadvantages. Firstly, it is punishable; installing xenon in cars not specified by the factory is fraught with deprivation of rights. Secondly, xenon increases the load on the wires, which means the headlights will have to unload the relay anyway. Thirdly, the xenon you installed will most likely blind oncoming cars.

You may find the article useful on how to install xenon in Nexia.

Unloading the low beam and (or) high beam . This method of improving headlights on a Nexia is one of the most important and basic. The wiring on the car is very thin; when using high beams for a long time, the wires and contacts heat up, which leads to a deterioration in the brightness of the light. Since light bulbs lose their voltage due to poor contacts and heating of thin wires. Unloading the headlight relay will help relieve the load on the ignition switch contact group, as well as improve the light. It has been tested that the brightness of the light increases from 10 percent.

Read the article on how to unload headlights on a Nexia using a relay.

Replacing the headlight with a new one . Approximately every two years, some owners change their entire headlight units, and for good reason. After about two years of use, the internal reflector burns out, reflects less light, and the outer plastic glass becomes cloudy and scratches, causing the headlights to shine 10%-20% worse. After replacing the headlight you will feel the difference. To order new headlights, an article with article numbers for lights for Nexia .

How to adjust headlights on a Matiz

How to EASILY remove the headlight of a Deo Matiz / daewoo matiz

Deo hardware headlight is not adjustable Solved

ADJUSTING CAR HEADLIGHTS UNIVERSAL FOR ALL MODELS

How to adjust Daewoo nexia headlights (Where and what to turn)

Adjustment of the headlights without the device

We disassemble the Daewoo Matiz headlight.

DIY headlight adjustment

DAEWOO MATIZ Clutch pedal height adjustment

Adjusting car headlights

From the moment of purchase, I didn’t like the fact that the original headlight bulbs were dim and the right headlight shined too high.

I bought Phillips lamps. Wite vision is a bit expensive. White light in winter on wet asphalt merges and is less visible. I decided to take VisionPlus +60%.

Installed. The right headlight was dangling the reflector itself up and down. I saw the adjusting bolts and began to twist, which is not very convenient... I screwed the pancake... It turned out. The bolts closer to the center (towards the engine) are for right-left adjustment. And there are others near the wings, they are up and down... p.s. I'm looking for a stand for adjustment... The right one no longer hurts, it shines on the side of the road... p.s.s. The right corrector has stopped working... Added. Second evening. Twisted the screws. Now both headlights shine in the center. The proofreader worked. Added. Third evening. Twisted the screws. Both headlights shine straight. Height is more or less approx. It is best to set up not on a wall, where there is a border parallel to the ground. And vertical lines.

Adjustment of the direction of the headlight beams and fog lights should be carried out at a service station using special devices.

To roughly adjust the headlights, you can use the method below.

Headlight adjustment diagram

We adjust the direction of the headlight beams on a fully fueled and equipped car, with normal air pressure in the tires. We place a load weighing 75 kg on the driver's seat. We install the car on a flat horizontal area at a distance of 10 m from the screen (you can use a garage wall, a sheet of plywood or hardboard). We draw a horizontal line on the screen at a height equal to the distance from the center of the headlights to the floor. Below it, 100-150 mm, draw a parallel line. We draw a vertical center line on the screen (the distance from it to the center of the left and right headlights should be equal) and lines corresponding to the centers of the headlights (AE and BE). We set the headlight adjustment control to position “0” (one driver or a driver with a passenger in the front seat) and turn on the low beam headlights. Cover the right headlight with an opaque material or disconnect the wire block from it.

Why is there bad light on the Nexia? Causes

The first reason is poor quality headlights . The low quality of Uzbek headlights is one of the main sources of this problem; at first the low beam on the Nexia lights up normally, but as it is used it begins to dim. Because the reflector burns out or becomes cloudy.

The second reason is low voltage . The wires that go to the headlights are very thin, and the low beam also goes directly through the contact group because of this there is a strong loss on the light bulbs.

The third reason is lenses . Nexia lenses in combination with halogen bulbs are not the best pairing. Most cars have lenses if they use xenon bulbs instead of halogen bulbs.

The fourth reason is natural wear and tear . As the car is used, the headlights begin to become cloudy; wiping the headlights dry with a rag will scratch the surface severely, so the headlights will shine worse.

So, we have figured out the reasons, now we need to solve the problem with poor light on the Nexia once and for all. In order to improve the light on Nexia, you can perform a number of manipulations.

How to start a car with a dead battery?

Spread the love Towing, pushing or borrowing electricity - how to start a car with a dead batteryContents1 Towing, pushing or borrowing electricity - how to start a car with a dead battery1.1 Problems with starting hybrids1.2 How to start a car in an emergency1.2.1 We are in VK When after On a cold night you are running out of battery power, it is better not to use traditional starting methods. Modern […]

Read more: Hidden drive valves

Did you like the article? Follow our channel for new ideas of useful car tips. Subscribe to us in Yandex.Zen. Subscribe.

The performance of the lighting system is very important for every motorist, so do not forget to periodically diagnose and inspect all elements to ensure that they are in working order. In this review we will look at how to replace a low beam lamp on a Matiz without removing the headlights and bumper and other large-scale work. The process has certain nuances that you should definitely be aware of in order not to damage the car components.

Improve headlights on Nexia

Install new headlights. Installing new headlights is a good option if your headlights are completely damaged, for example, with a crack or the reflector has turned black. If everything is fine with them, then try unloading the headlights, that is, installing a relay on the Nexia headlights to improve the voltage on the bulbs, the result will be brighter.

Also, to make the light better, installing xenon in the Nexia will help, then the combination of a lens and xenon lamps will allow you to forget about poor road lighting. If you don’t want to break the law (installing xenon yourself is prohibited in the Russian Federation), then another option will help - install other light bulbs. Yes, there are light bulbs from osram or philips that really improve the light, usually they have special markings on them.

No matter how trivial it may sound, installing additional lighting will help improve lighting. Try installing fog lights if you don't have them or adding external lamps.

If your car is not that old, you can try polishing the headlights. At first, the light will improve and the road will become better visible.

If you know another way to improve the headlights on the Daewoo Nexia, then write in the comments below

The working process

If everything is organized correctly, the replacement will be done quickly and without any problems; it is important to be careful and not rush.

Preparation

To carry out the work you will need the following:

• Low beam lamp for Matiz in the amount of 2 pieces, this model uses H7 type halogen elements with a power of 55 Watts, you should not purchase more powerful options, as this will lead to overheating of the car wiring and other problems in the form of burnt contacts and failed controls. You can opt for LED solutions; they are more expensive, but they also have a resource three times longer.

Read more: How to spell Lamborghini correctly

• When carrying out work in the garage, or even on the street, we advise you to stock up on a flashlight; with its help you will clearly examine everything down to the smallest detail, which will help carry out the work faster and easier.
• We also recommend taking a small mirror and having someone to hold it, this will help you see the inside of the body without having to stick your head under the hood. You yourself will appreciate how convenient it is to work while controlling the process through the mirror.

Replacement

The instructions for carrying out the work are quite simple, and you can easily do them yourself; this will not only get a high-quality result, but will also save significant money.

A step-by-step description of the process is as follows:

• First of all, you need to disconnect the connecting block of the wires, which is located outside. Everything here is very simple and easy: grab the chip and pull it away from the body, under no circumstances pull the wires, as you will damage them and have to deal with them later, and this is much more difficult than simply replacing a light bulb.

• Now nothing prevents you from removing the rubber plug, this is done simply: there is a tab on top that you need to grab and pull, the cover can be removed very easily.

• Next, you will need a mirror, with which you can view the location of all internal elements. You need to release the spring clamp, which holds the light bulb and does not allow it to move when vibrating, to do this, press the two antennae, either together or separately, and disengage from the protrusions of the body, do not pull too hard, as you can pull the clamp out of its place of attachment , and putting it in place is not an easy task.

Important! The position of the clamp may vary, with some headlights having the antennae at the top and some at the bottom, so check carefully which option you have.

• Then nothing holds the lamp, and it can be easily removed, after which a new one is installed in its place. There is nothing complicated here, the only thing you should remember is that you should not touch the glass, take the product by the base, but if you do touch the flask, then wipe it with a cloth soaked in an alcohol solution.
• Assembly is done in reverse order and takes just a few minutes. (See also the article Fog lights on Gazelle Business: features.)

Foundation and reason

An inexperienced driver of a standard Nexia may not realize that the car’s lighting has objective shortcomings. The same cannot be said about experienced motorists. Those who have driven different cars often complain about the lack of power of standard Daewoo Nexia lighting devices. The brightness of the n150 head optics is really insufficient even for new cars that have recently rolled off the assembly line. What can we say about used equipment and tarnished lenses.

The root of the indicated situation lies in the electrical settings. For an unknown reason, Daewoo designers made the logic of the system a little strange and incomprehensible. If you have 12.5V available on your battery, only 11V reaches the optical bulbs, that is, noticeably less. Almost 10 percent is lost somewhere unknown.

The process of correcting the defect will take a few hours. It is, of course, advisable to have a basic understanding of the structure of electricity and electrical appliances. Additionally, you will need the ability to solder and measure circuit voltage. The effort and time spent will result in safety and more comfortable night driving.

Preparation for manipulations

To quickly understand whether it is necessary to modify the electrical wiring of the Daewoo Nexia 150, you will need an ordinary sensitive multimeter. We measure the battery voltage and remember (record) the data. With the low beam on, we take measurements at the connections of the lamp base chip. If, as a result of comparing the two obtained figures, you find a difference of 1.5 volts, then there is unspent potential that is easy to use. In this case, the operation described below will have a positive effect on the efficiency of the optics.

To improve the headlights on the Daewoo Nexia n150 you will need to purchase the following components:

• two four-contact relays 30A;
• two pads for them;
• two 20A fuses in a sealed housing;
• Electrical wire with a cross-section of 2.5 square meters. As a rule, a 2.5 section is used in the ligament system, but in some areas a thinner one is suitable.

Foundation and reason

An inexperienced driver of a standard Nexia may not realize that the car’s lighting has objective shortcomings. The same cannot be said about experienced motorists. Those who have driven different cars often complain about the lack of power of standard Daewoo Nexia lighting devices. The brightness of the n150 head optics is really insufficient even for new cars that have recently rolled off the assembly line. What can we say about used equipment and tarnished lenses.

The root of the indicated situation lies in the electrical settings. For an unknown reason, Daewoo designers made the logic of the system a little strange and incomprehensible. If you have 12.5V available on your battery, only 11V reaches the optical bulbs, that is, noticeably less. Almost 10 percent is lost somewhere unknown.