The machine is our main assistant in the modern world. Every second Russian has his own car. Most car enthusiasts prefer domestic brands of cars. And far from being in last place is the Priora in the ranking of the most popular cars on Russian roads. And not in vain, because now in Priora you can fully enjoy the trip.
Lots and lots of modern details already fill the precious Priora. But the most important thing is the irreplaceable Panasonic Priora air conditioner. But many have little budget and cannot afford the Priora equipment above the basic one. And the basic one, alas, is not equipped with air conditioning. And in this case, an excellent solution was found. You can buy a basic Priora and simply install the air conditioner yourself later.
Read about what kind of air conditioner is installed on a Priora, how it is installed, and where it can be installed.
Why Panasonic and not something else?
It was Panasonic that was chosen for the Priora. And this has its advantages:
- Lots of features.
- Inexpensive.
- Optimal power.
It is the versatility of this air conditioner that does not leave empty system spaces on the device; each button has its own function. And why overpay for such a thing if the power of this air conditioner is quite enough.
Why is it necessary to replace this element?
Dust in the summer, sand, leaves, dirt - all these particles can get into the cabin when you are at speed. But this is not the only thing that can happen if you do not have a filter installed in your cabin. If the purifier becomes dirty, air from the street will stop flowing into your car altogether. The result is foggy windows, poorly functioning air conditioning, or simply blowing air into the interior.
Therefore, you need to seriously approach the issue of regularly replacing the purifier. It is recommended to control the replacement time according to one of the criteria. Replacement is carried out:
- or once every 20,000 km of travel;
- or every year, before spring.
It is better to be guided by the first option, and your salon will always be clean. In winter, a cabin filter element is also necessary. Because the furnace is also powered by the air conditioning system, and clogged air paths also impair the operation of the furnace.
For greater efficiency, it is recommended to install carbon purifiers.
Installation of Panasonic air conditioner on Priora
Installing a Panasonic air conditioner on a Priora raises many questions even for the most experienced car drivers. The most popular of them:
- install it yourself or contact a special service;
- where to buy air conditioner;
- how to install it;
And it’s not so difficult to figure it out, of course, if you’re not confident in your abilities, then it’s probably better not to try and pay money to professionals. And let them do their thing. Any hundred will not refuse such a trifle; they will quickly and easily install the required air conditioner.
Where can I buy a Panasonic air conditioner for a Priora? The shelves of shops, markets, and online stores are simply overflowing with this type of product. And, most likely, there is no difference where to buy completely identical things.
If you are afraid of fakes, try to find an official supplier in your region. This is probably the only guarantee that they will sell you an original air conditioner, because price has long ceased to be a marker of quality. A fake can also be sold at a high price. So take it at the price you like.
You should be very careful with the installation. There are a lot of different little things that you need to know in order to avoid disastrous results.
Air conditioner replacement options
For a Lada Priora car with air conditioning, the replacement procedure has a different sequence due to the different location of the interior cleaning system. In this case, it is located not under the frill, but behind the engine. At the same time, it is closed with a special lid designed for sound insulation. Depending on the brand of air conditioner, the method for replacing it differs. Let's consider each option for Lada Priora separately.
First replacement option
To work with a car with Panasonic air conditioning you will need:
- crosshead screwdriver;
- 5-7 minutes.
The sequence of actions when repairing a Lada Priora is as follows:
- Unscrew the 2 screws that hold the casing of the soundproof housing.
- Hoses and tubes may interfere with unscrewing the screws, so you may need to loosen the clamps holding them. This will avoid damage and abrasions.
- After this, you can directly unscrew the screws securing the purifier plug.
- Now you can replace the filter by removing it using the latch tab.
- To remove the filter, the manufacturer provides special bending of the slots (for convenience).
- Having installed a new interior cleaning unit, repeat all steps in reverse order.
At first glance, it seems that there is nothing complicated in servicing a car with a Panasonic air conditioner. However, without special skills, it is better not to try to work independently. Because it is possible to connect disconnected hoses and pipes incorrectly or install the filter itself incorrectly. Then the replacement will have no effect.
It is recommended to replace the soundproofing casing along with the screws on which it is screwed. It has been experimentally proven over a long period of time that self-tapping screws wear out within one period of use. By replacing the old screws with new ones, you can be sure that the filter is securely fastened.
Installing a Panasonic air conditioner on a Priora yourself
To install an air conditioner on a Priora, it is necessary to disassemble the existing heating system.
First of all, the antifreeze is drained, then the air filter housing is removed. Be sure to remove the bumper and remove the filter and the air conditioner fan itself. After all the spare parts have been removed, we proceed to dismantling the generator.
Included with the purchased Panasonic climate system, the Priora already has its own generator, it is adapted for the operation of this model of air conditioner. We simply install a new unit in place of the old one.
Don’t forget to attach the supports on which the compressor from the air conditioner and, of course, the generator itself will be mounted. We fasten the tension roller bracket. This may require a small hole in the belt cover. Only after this we combine the housings of the stock furnace and the evaporator with each other.
Next, we connect all installed systems (compressor, radiator, fan, generator) to the contract wires.
Replacing the cabin filter on a Priora without air conditioning
In the configuration without air conditioning, the cabin filter is located on the right under the hood behind the grille. Open the hood and use a Phillips screwdriver to unscrew the grille, as shown in the figure.
Next we see the filter housing cover, unscrew the three mounting bolts. Remove the cover and take out the old filter.
If the filter housing is dirty, clean it and only then install a new filter. Then we reassemble in reverse order.
How to replace the cabin filter on a Priora with Panasonic or Halla air conditioning
We open the hood, the filter is located directly behind the engine, to get to it you need to unscrew the two screws that secure the hood sound insulation. By unscrewing the screws we will see the cabin filter cover.
If you have a Panasonic air conditioner installed, use a Phillips screwdriver to unscrew the latch of the filter cover, then remove the cover itself. If a halla filter is installed, then the latch of the filter cover just needs to be tightened, after which the cover will be removed.
Carefully remove the old filter and install the new one. To make installation easier, twist the filter into a fan as shown in the figure.
Where is the cabin filter located in Lada Priora
If your car is equipped with Panasonic or Halla air conditioning, the cabin filter is located vertically, behind the engine. To get to it you need to unscrew several bolts of the hood sound insulation.
If you do not have air conditioning, the filter in the Priora is located under the hood on the passenger side. To replace it, you will need to remove the grille.
With the help of our detailed instructions, you can replace the cabin filter yourself without unnecessary problems and the help of a car service.
Replacing the cabin filter in a Priora without air conditioning
In a car without air conditioning, replacing the cabin filter is different from working on a car with an artificial cabin cooling system. The cleaning element is located near the air intake grille, between the windshield and all units under the hood. How to change the cabin filter yourself? Even a novice auto mechanic can cope with this task. To work you will need:
The manufacturer recommends replacing the cabin filter of the Lada Priora, depending on operating conditions, every 10,000 km, or every 5-7.5 thousand runs under more severe conditions. The process of removing and installing the filter may vary depending on the vehicle configuration.
Replacement
Replacing a regular filter with an air conditioner has some differences, but the set of tools is identical: a rag, a Phillips screwdriver and a new cabin filter.
Priora without air conditioning
- Open the hood of the car.
- Remove the grille, which is located under the windshield on the left side. To do this, remove the screw caps and unscrew them. This way we free up access to the filter.
- Remove the four bolts securing the air purification component cover.
- Let's remove this cover.
- We take out the used cabin filter.
- We clean its seat from dirt; it is possible to use a vacuum cleaner.
- Install a new filter.
- We assemble all the parts in reverse order.
Priora with air conditioning
- Open the hood of the Priora. Find the place to install the filter.
- We bend the upholstery. Unscrew the filter latch using a Phillips screwdriver if the system is Panasonic.
- We clamp the latch, if Halla, after which the lid will open.
- Pull out the old cabin filter.
- The new filter must be twisted using special slots in the housing.
- Carefully install the filter into its seat. Do not press too hard, as this may damage it.
- Close the lid and assemble all the parts in the reverse order.
How to properly replace the cabin filter?
When replacing the cabin filter in a Priora with air conditioning, there is no need to follow any safety precautions. However, it is advisable to carry out this procedure on a cold engine, otherwise you may get a serious burn. Before replacing, you need to determine the model of the air conditioner installed on the car. So, on Priors with air conditioning from Panasonic, the cleaners are attached with self-tapping screws, while on Priors with Halla it is held on by latches. Another relevant difference is the price: filters for Panasonic are cheaper than for Hallu. To replace you will need:
- Crosshead screwdriver;
- Vacuum cleaner or air compressor;
- New filter.
The replacement process consists of the following steps:
Stage one
The first stage involves removing the fasteners and removing the part.
- Open the hood;
- Unscrew the sound insulation mounting bolt and unscrew it;
- We remove the filter element plug by unscrewing the bolt or removing it from the latch;
- Remove the cabin filter.
Stage two
The second stage involves cleaning the slot, installing a new part and reassembling in reverse order.
- Blow or vacuum the part slot;
- Insert the new filter by bending it 90 degrees;
- Replace the filter cover;
- We install sound insulation.
The procedure for replacing the cabin filter in a Lada Priora with air conditioning can be considered complete. The algorithm for replacing the cabin filter on a Priora without air conditioning differs from this procedure in that the part is located in a different part of the car and requires a different sequence of actions to replace it.