Where is the body number on the field?

Technical characteristics of engine 21214

The type of power unit is in-line. The camshaft is installed on top of the engine. The cooling of the power unit is closed and forced. Detailed technical characteristics of the VAZ 21214 modification engine are below in the table.

Attention! The eight-valve engine from the VAZ 21214 company has several modifications. Its latest models are produced with pairwise parallel injection.

Let's look at the modifications of the VAZ 21214 engine:

• engine 21214-41 is supplemented with a hydraulic steering pump. A welded steel manifold and Yalta hydraulic supports were installed. Ecological class Euro 3;
• The 21214-34 engine is not supplemented with power steering, and the manifold is made of cast iron alloy. Belongs to Euro 3 class;
• engine 21214-33 repeats the previous modification only with the addition of a power steering pump;
• engine 21214-32 - everything is the same as in the previous model, only a 215 mm flywheel is installed for the clutch;
• engine 21214-31 has a welded steel manifold, hydraulic steering pump, belongs to Euro 4 class;
• engine 21214-30 has a welded steel manifold, is produced without a hydraulic steering pump, and belongs to the Euro 4 class.

Similar article Problems and reviews Mercedes OM651 engine
And now let's move on to the description of this engine.

Chevrolet Aveo engine number

C - model year code. The catalog of Cruz models includes many different model configurations.

Vin number for Chevrolet Cruze

The sign indicates that this model was released in the year. Cars produced in years will be marked with the symbol A.

The year's equipment is encrypted with the symbol B. Production encoding is 3. The body serial number is the remaining 6 characters. The VIN sticker is located on the B-pillar to the left of the driver, directly behind the door.

In addition, there is one more place - this is the place under the front passenger's carpet. At this point the code is stamped on the metal, so it cannot be torn off or changed.

Deciphering the Chevrolet Cruze VIN code is a fairly simple procedure if you know what its designations mean. Therefore, let's take a closer look at the structure of which it consists.

The code consists of seventeen numbers and letters of the Latin alphabet. These signs are combined into three groups, each of which carries its own information: The first three characters indicate the international code of the plant that manufactured the car.

In the situation with the Chevrolet Cruze, there can be two of these designations: The fourth to ninth characters provide information directly about the car: J is the factory designation of the car model. For Cruz, this is the letter J. F is the type of transmission and drive.

In this case, F stands for manual transmission and front-wheel drive. There are also two more designations - 19, a four-door sedan with six windows, and 68, a four-door hatchback with six windows.

Description of the motor device

In terms of geometry, the VAZ 21214 engine is identical to its predecessor - the thirteenth model. Experienced mechanics may notice small changes in the design of an internal combustion engine. For example, the size and shape of the lid have changed. Since engineers installed a crankshaft position sensor in the engine.

Attention! The 21214 engine from the VAZ company has a special hole for installing a bracket to which the power steering pump will be attached.

Some models, as described above, differ in the manifold alloy - cast iron and welded steel. The latest manifold was created for engines with Euro 3 environmental class. Thus, the weight of the motor was reduced. The neutralizer warms up faster. The temperature can be kept at a certain level necessary for optimal operation of the collector.

And the crankshaft pulley is supplemented with a timing disc. The cylinder head is equipped with additional holes. They are intended for mounting the phase sensor.

Instead of adjusting bolts, engineers installed hydraulic supports. A lubricant is supplied to them. Thus, we got rid of the constant adjustment of the thermal clearances of the valves. The fuel rail is made of stainless steel.

The operating order of the cylinders is as follows: 1, 3, 4. The timing drive is equipped with a single-row chain with a hydraulic tensioner. Now this chain does not need to be constantly tightened. The oil pump sprockets have only thirty teeth.

Initially, injectors from Bosch were installed on the fuel rail. Then we switched to installing Siemens VAZ 20734. They differ from the first ones in color - yellow. Phased fuel injection sets environmental standards such as Euro 3, while parallel injection sets Euro 2.

The engine is equipped with a fuel injector and an idle speed sensor. The diameter of the cylinders is 82 mm. The torque in operating mode is 127 Nm, but the engineers have included a reserve for tuning the power unit. An experienced car owner will be able to increase engine power by 50 horses during tuning.

Similar article Technical characteristics and reviews of the 2AZ FE engine

Major repairs are not difficult. It can be carried out in a garage, the main thing is to understand the device and understand the design of the power unit.

It is recommended to change the oil and oil filter device every 10 thousand kilometers; under difficult operating conditions, these periods should be reduced to five thousand. The candles last for sixty thousand kilometers. The battery will last the same amount of time if it is not used in northern regions. But the cabin filter is updated annually, regardless of the vehicle’s mileage.

Vin engine number on a Chevrolet Cruze: where is it located?

The table with the code is closed with a plastic plug. If it is not possible to find primary information about the chevrolet cruze engine number data, the sticker is damaged or is missing altogether, then there are duplicate plates on the body, there are two of them.

Typically, they are located in the front of the car, on the left B-pillar. Thus, the driver, when sitting in his seat, will always see the vehicle data.

Chevrolet Aveo engine number After buying a car, we searched for a long time where the engine number is located, we couldn’t find any information on the net, we decided to add it ourselves Read: Engine mount Ford Focus 3 2. Ford Focus engine mount chevrolet cruze engine number 5. Chevrolet cruze engine number the supports are attached with two nuts to bracket on the engine cylinder block, chevrolet cruze engine number holder. Where exactly is the engine number on the Lada Priora? Each car comes with techno annotations, where all the information regarding the car is carefully and clearly presented, and in several languages.

What cars was the power unit installed on?

Engine 21214 is installed on the following vehicles:

• Niva 2121 4 WD;
• Niva 2131 4WD;
• Lada Urban 4 WD;
• Lada Urban after restyling.

Similar power units from other companies:

• Opel C20NE;
• Hyundai G4CM;
• Nissan KA24E.

Many car owners speak rather unflatteringly about this engine. But there are those who like the engine from the VAZ company.

Common internal combustion engine problems

Why are there so many negative reviews about this internal combustion engine model 21214:

• strong oil burner. Intensifies with engine aging. Occurs due to carbon deposits on the cylinders. Not only does oil consumption increase, but the car also begins to consume fuel in large quantities;
• elevated temperature. The thermostat often fails, so the temperature cannot stabilize in the engine. Most often, overheating also occurs due to a clogged cooling radiator. Therefore, experienced mechanics advise checking the cooling system and cleaning it annually. This is especially necessary if the machine with this motor is used in difficult operating conditions;
• The motor itself is noisy. The engine noise increases even more when the following elements break: pumps, hydraulic compensators, main and connecting rod bearings. Experienced mechanics recommend immediately contacting a service center if noise occurs. Since, if the connecting rod bearings become unusable, the entire engine will need major repairs;
• low service life. Car owners note that the service life is one hundred and fifty thousand kilometers. Despite the fact that engineers claim 300 thousand kilometers, the engine does not cover that much. Although there have been cases when, with proper care, the engine can cover this mileage.

Similar article Technical characteristics and operation of the 1UZ FE engine

The advantage of the engine is that it can run on any type of gasoline: AI 92 or AI95. It makes no difference to the engine what kind of fuel it consumes. However, the car owner will constantly have to monitor the level of lubricant inside the engine, which tends to quickly decrease.

Another advantage is the oil seal that is installed on the water pump. It has a high lifespan and does not crumble from the first strong overheat. Experienced mechanics also have the advantage of hydraulic valve lifters and an automatic chain tensioner. These elements have a high lifespan and can outlive the engine itself, with proper care, of course.

Do not use a thickness gauge on a dirty car.

Do not use the thickness gauge on a dirty machine. Firstly, the device readings may be incorrect. Secondly, using a thickness gauge on a dirty body can damage both the device itself and the paintwork.

1. Don't use no-name or cheap thickness gauges.

2. Check in advance the acceptable paint thickness for a specific model. For attached parts this is usually 100–200 microns, for the body frame - 40–60 microns.

3. Select a device based on the inspection conditions: winter - you need a frost-resistant thickness gauge, the machine has aluminum parts - a device that works with non-ferrous metals.

4. Operate a calibrated instrument on a clean machine.

5. Measure the element at at least five different points perpendicular to the body.

6. Measure not only the hinged panels, but also the internal parts of the body.

Price of a new and contract engine

The price of an injection engine on the secondary market starts from 20,000 rubles. The new ICE 21214 costs 86 thousand rubles. Although experienced mechanics say that by purchasing a contract engine, the car owner will not go wrong.

Before selling a contract engine, it is checked by experienced mechanics. Only original parts are installed on it. A guarantee is given.