How much does a 3 by 6 iron garage weigh?

Interesting facts and main advantages

The first prefabricated Izhora garages began to appear in the early 50s. They got their name from the location of the metallurgical plant on the Izhora River. Since then, these designs have been in incredible demand among car owners. Let's take a look at the main advantages of garages, their technical characteristics and structure assembly diagrams.

Let's start our review of such structures with their main advantages. These include:

• simplicity and efficiency of assembly;
• the ability to dismantle the building at any time;
• light weight, therefore, there will be no need to make a capital foundation for the garage;
• strength and resistance to negative environments;
• the ability to use the structure not only as a garage, but also as a workshop or warehouse.

How to dismantle an iron garage?

Dismantling metal garages has a number of features that need to be taken into account before moving the box to a new location. Complete disassembly of a garage box includes the following work:

• Marking of all main parts of the structure,
• Collection of all fasteners (bolts, nuts, washers),
• Gate dismantling,
• Dismantling the roof elements (you can leave the intermediate trusses on the frame, but the sheathing will have to be removed entirely),
• Removing sections of side walls,
• Dismantling the bottom trim and vertical posts.

The most important thing here is to correctly lay all the parts one after another and try to load and unload the frame elements without defects. Pay special attention to the roof sections, since most often they are subject to severe deformation. The video below shows step by step how to assemble a metal garage quickly and without the use of special equipment. By doing all the work in reverse order, you can disassemble the garage without any problems.

The article will talk about quick-assembled garages . Sometimes a car owner simply cannot bother creating a capital, solid garage.

But you still need to store the car somewhere. for prefabricated garages can offer a temporary solution to the problem .

There are four main types of such structures - metal, frame, awning, using a sandwich panel.

Tent models stand out due to their extremely fast installation , even compared to all other prefabricated garages. In terms of their structure, they are a special fabric that is stretched over a rigid frame. More solid options are sandwich panels or frame buildings. If you build them with a foundation and waterproof them, you will get a fairly reliable shelter .

Technical characteristics: dimensions and weight

In the production of Izhora garages, durable and proven sheet steel is used. Its thickness can vary from 1.5 to 3 millimeters. To fasten different elements together, you need to use special M 12 bolts. To prevent the garage from corroding, all its elements must be primed and painted.

The average weight of the products is 1300 kilograms. Therefore, they can be easily transported to the assembly site using lifting gazelles. Garages were produced in two modifications with dimensions: 3x6x2 and 3.3x7x2.

The Izhora garage includes the following sections:

• 13 pieces of straight sections with curved edges on both sides;
• 2 end sections;
• 2 sections with hinges for gates;
• 3 gate sections;
• 2 corners for gates;
• 4 front sections;
• 14 roof panels.

In total, this design kit contains 34 sheets of metal and special fasteners.

Of course, the dimensions of a domestic prefabricated garage are designed only for storing a small car. You are unlikely to be able to service your car in such a small garage. However, if you buy roofing and wall sections separately for construction, you can increase the length of the building. But keep in mind, this will cost you quite a bit. Since you will have to completely redo the entire garage floor and gate frame.

Features of such buildings include natural ventilation through cracks. Thanks to this, excess condensation will not accumulate inside the room. You can assemble a garage using different technologies: bolting or welding.

The weight of a metal garage - what needs to be taken into account when calculating

The weight of an iron garage depends on many parameters that must be taken into account when calculating the weight of the structure.

An iron garage is an inexpensive and fairly reliable shelter for a car. It will solve many pressing problems: it will hide the car from bad weather or the hot sun, accidental damage and prying eyes; you can carry out simple car repairs, diagnostics or other preventative work in it.

Usually, few people think about the weight of a building, but sometimes a situation arises when a car owner needs to know the weight of a metal garage, so in this article we will talk about the types of metal garages and provide calculations for buildings made of different facing materials.

Types of metal garages

All-welded metal garage.

Garages that have a frame made of steel structures (see Frame garage: how to build it yourself) are considered metal, although they can be sheathed with various materials.

They are divided into two types:

1. All-welded structures are assembled from sheet steel and all elements are connected by welding. Such a garage cannot be disassembled and can only be transported in assembled form. An all-welded garage can be installed anywhere, it is particularly reliable against penetration and has strong connections.
2. Prefabricated garages have bolted or anchored connections of parts; the structure can be disassembled and transported in a compact form. It is recommended to install this type on the territory of a personal plot or in a country house, not far from the house, so that there is supervision, since it has poor protection against burglary.

A prefabricated garage made of metal plates, assembled using bolted connections.

Important! In turn, prefabricated structures can have different cladding, and this also determines how much an iron garage weighs.

The following materials are used for lining the walls of the structure:

All these materials have different weights, so when determining the weight of the garage as a whole, this must be taken into account.

How to calculate the weight of a garage

Garage made of painted corrugated sheet metal.

Data on the weight of the transported structure may be needed in the following cases:

• When purchasing a garage and delivering it to a permanent location. If the building was purchased from a manufacturer, then the seller provides data on the weight of the order, but when the garage is purchased second-hand, then in this case the weight is often calculated by the buyer.
• When transporting a garage to a new location (owner moving, sale, garage for demolition, etc.). If the structure was built with your own hands, the owner may not know its true weight.

For a sample, we will calculate the weight of a metal garage 3 x 6 x 2 m2 (width x length x height) of an all-welded type, in which the lining is sheet steel 4 mm thick. This is the minimum standard size into which almost any passenger car will fit, well, except for minibuses.

On what basis can the structure be placed?

As noted earlier, the prefabricated Izhora garage is lightweight. Therefore, it does not require capital arrangement of the foundation. In order for the garage to serve you for a long time and not lose its technical characteristics, it is recommended to place it on a concrete base. Those who neglect this advice are faced with the problem of corrosion on the metal base of the building.

Before you begin installing the Izhora garage, you must:

1. Prepare the area: remove all bushes, large debris, branches, stones from the place you have chosen.
2. Make a small depression in the soil to lay waterproofing, then you can install formwork and make a frame from reinforcement.
3. Form a screed, the height of which should be 10 centimeters above ground level. This way you will protect the garage from excess moisture that will come from the ground. The screed should be left until it dries completely.
4. In order for the walls to be firmly fixed to the base, it is worth making a bottom trim. Weld metal corners and profile pipe. Before laying the trim on the base, lay sheet waterproofing.

If you are installing such a collapsible garage temporarily or plan to dismantle it in the future, it is better to use bolts rather than welding to secure the parts together.

After you have thoroughly prepared the base for the garage, you can proceed directly to its assembly.

How much does a 3x6 metal garage weigh? The answer is in the article!

On average, the weight of a 3x6 metal garage varies between 3-4.5 tons. You may only need information about how much a garage weighs in 2 cases:

• You haven't yet decided which metal garage you're going to buy.

In this case, the weight of the metal garage will affect the cost of delivery and the load that the concrete base will receive. If you purchase a garage box from a specific manufacturer, then all the necessary information can be found in the delivery note.

• You have decided to move your old metal garage to a new “place of residence”.

In this case, it is quite difficult to know the exact weight of a 3x6 metal garage, since many people cook it themselves. In this case, various material options are used - from various configurations of corners to metal thickness varying around the entire perimeter.

If you are faced with the 2nd situation, then using our method you will quickly calculate the approximate weight and be able to choose the right manipulator.

Approximate calculation of how much a 6 by 3 meter metal garage weighs

Weight of a metal garage 3x6

Initial data: length 6 meters, width 3 meters and height 2 meters. The basis of the design is an all-welded type of garage, in which a layer of sheet steel with a thickness of about 4 mm (the most common option) acts as a cladding. These are the minimum standard garage sizes for any modification of a passenger car.

Important: How much an iron garage weighs will mainly depend on the thickness of the sheet covering and the total surface area. The basis of the structure for passenger cars weighs at least 2 tons. The roof covering itself will be 1-1.5 tones. The remaining weight is provided by racks and shelves that are installed inside.

Briefly, for the calculation, do the following: Calculate the volume of the garage box by multiplying the length, thickness and height along the axial dimensions. Then, knowing the volume values ​​of the roof and wall, you multiply the resulting figures by the specific gravity of the sheet metal. As a result, we get a weight that will differ by 5-10 kg from the real one.

A direct example of calculating the weight of a metal garage

We count all the elements one by one:

• Area of ​​side walls: 2*6*2 pieces = 24 sq.m.
• Area of ​​a 2-pitched roof, taking into account the small overhang of the canopies: 2 * 1.9 * 6.2 * 2 sides = 47 sq.m.
• We calculate the area of ​​the rear and end walls together with the gates: 3*2*2 pieces = 12 sq.m.
• The approximate area of ​​2 triangular pediments is 4-4.5 sq.m.
• If there is a metal floor, we also calculate its area: 3*6 = 18 sq.m.
• We add up all the obtained values: 24+47+12+4+18 = 105 sq.m.

Since in the initial data we have the thickness of the walls of an iron garage within 4 mm, then according to GOST we find the specific gravity of 1 sq.m. canvases. It is equal to 31.4 kg. All that remains is to multiply the resulting mass by 1 sq.m. steel sheet for the total area. We get 105 sq.m * 31.4kg = 3297kg. As a result of calculations, we found out how much a 3mx6m iron garage weighs without taking into account the weight of the gate frame and the structure itself - only the weight of the sheathing. The frame together with the gate will weigh another 800 kg - 1 ton. As a result, the total weight will be 4-4.3 tons.

Below are the average weights of the most popular metal garage sizes:

• Garage 4x6 m - weight 4.5-4.8 tons;
• Garage 3x5 m - weight 3.8-4 tons;
• Garage 4x5 m - weight 4.1-4.2 tons.

We hope that the calculation methodology is clear and does not require additional comments. At the end, I would like to show a video of the actual assembly of a metal garage from scratch to full commissioning.

garazhtyt.ru

Instructions for assembling an Izhora garage with your own hands

Before you begin the assembly process, invite a friend to help you. Because it is difficult to cope with such work alone. Be sure to prepare all the necessary tools and supplies. The tools you will definitely need are:

• hammer;
• sledgehammer;
• box wrench;
• locksmith's beard.

There are two ways to assemble such a structure.

1st method (for this assembly you must invite a friend):

1. Begin assembling the end wall sections.
2. Assemble the side sections together.
3. Cover the walls with a roof.
4. Install the gate.

Method 2 (you can do it yourself):

1. Start installing the garage from the back wall.
2. Add side panels to the end.
3. Attach the roof next to the side panels.
4. Finish the assembly by installing the gate.

Specifications

The classic “shell” garage is used to store a passenger car. As a rule, it consists of two steel or reinforced concrete doors. One of them is firmly fixed and stands on the floor. But the second one, like a gate, opens. It rises, rotates and lies on top of the base of the gate.

It turns out that when opened, half of the car immediately ends up on the street.

Materials used

Durable metal is used to make the garage. Thick sheets, as a rule, weigh quite a lot. Typically their weight is within a ton. Therefore, it can be difficult to work with them without using special equipment.

It is also impossible not to note the fact that the shell is almost impossible to lift and move without a crane.

Safety

The structure, made of two doors, is considered vulnerable by many. After all, snow or raindrops can easily fall into the gap between them. In order to further protect the car, experts recommend using various seals. As an alternative, canvas capes are also purchased. However, this option is also risky, since the metal under the tarpaulin may become rusty.

In addition to weather conditions, the car must also be protected from vandals. The lock is installed at the junction of two doors. To would-be robbers, shells usually seem like easy pickings. That is why it is recommended to choose the most reliable locking schemes .

Standard sizes

As with a standard garage, the parameters of the shell depend on what kind of car they plan to keep in it. The usual parameters are two and a half meters high, three meters wide, and six meters long. This, as a rule, is enough for the driver to safely park the car without touching the walls.

For the manufacture of such a structure, solid sheets of metal profiles are used. It weighs quite a lot, so you have to spend a lot of time cutting and installing it.

There are several main types of such garages, each of which has its own advantages and disadvantages.

Based on the nature of their location, structures are divided into attached and built-in. The second type is bad because it can only be built during the process of building a house from scratch. It is installed on the ground floor and, if desired, can even have an entrance to the house. Thus, in winter you can get into your garage without even walking in the cold. If a protective structure for a car is needed after the house has been rebuilt, then you should choose another option. Namely, an attached garage, which can be located next to the home, or even be connected to it using a convenient corridor.

Separately, there is a collapsible metal version of the shell. They can be placed anywhere, even in the middle of the yard. Compact buildings of this type are easily located even in the city, and not just in summer cottages.

The last classification is the division of shells depending on the material from which they are made. They can be block or metal. The mechanisms that open the gates also differ. They can be either mechanical or automatic.

As the name implies, in the first case, the doors need to be raised and lowered manually, and in the second, everything is done automatically using a special mechanism.

How to assemble?

Any garage structure of this type is built in several stages.

Selecting a location

Before construction, you need to determine the ideal location for constructing the shell. Under the garage you need to choose a flat surface, ideally filled with concrete.

It is also worth deciding in which direction the sash should open. Most often, they try to place the shells in such a way that the driveway is short and convenient. For this reason, they are located closer to the gate.

Search for tools

The next step is choosing the right tools. The task is not difficult, but someone who has never done anything like this will still need to tinker during the work process and with the choice of materials and available tools.

Adviсe

Shells are very convenient and compact. To make them even better, you can use additional tips.

So, for example, car enthusiasts who spend a lot of time repairing or tuning their cars will like the idea of ​​at least a little insulating the garage. To do this, you need to sheathe it from the inside with panels. The classic heating option is unlikely to work here.

It is not worth saving on the insulation of a structure in the same way as on its protection. The anti-corrosion coating chosen to protect the metal must be of high quality so that the building lasts longer. If the shell is placed in a place with a cold or rainy climate, the protective layer will need to be renewed over time. Not only the appearance of the garage, but also the level of security of the car depends on this.

And finally, before installing a “pencil case”, especially in the city, it is worth checking again how legal it is. Laws change over time. To be sure that the new building will not be forced to be demolished or moved to another location, you need to clarify what rules are in force now.

The following video provides an overview of the shell carport.

Do-it-yourself metal garage: self-assembly of a garage, drawings

Probably the most convenient option from the point of view of construction is to purchase a ready-made factory kit containing all the parts necessary for assembly. Assembling such a metal garage with your own hands, with the help of two or three people, using only the simplest plumbing tools - wrenches, screwdrivers, pliers, hammer, etc., is not difficult and will take very little time.

Of course, if the kit is really high quality, manufactured using modern equipment, and all the parts are precisely adjusted to one another.

A collapsible garage kit must have detailed installation instructions. Similar kits for constructing a metal garage must be accompanied by detailed assembly instructions; a responsible manufacturer provides a guarantee on the quality and fit of their product. Another convenience is that you can “personalize” the order, that is, give the manufacturer the exact dimensions that correspond to the site allocated for construction and the needs of the owner.

On the websites of some companies that manufacture such metal products, there are often special built-in calculators - just enter the dimensions - and the optimal design option will be offered.

It would seem that this is the solution to the problem! But if you look at current prices, the desire to purchase such a garage may immediately disappear. Great luck if you can find an option of thousands for 70 ÷ 80.

As a rule, a standard-sized garage in its basic configuration can cost no less than a used domestic car, going “off scale” at a price of over a hundred thousand.