How to make Priora faster. Tuning Lada Priora, do-it-yourself tuning photos. Spider to help you

Interior tuning of Lada Priora sedan in the photo: main directions

Many motorists already have an idea of ​​how to organize the modernization of the chassis or power plant. For example, some owners successfully installed daytime running lights on the VAZ-2170, which increased not only the level of exterior appearance, but also safety.

There are many opinions regarding interior design. Some particularly “spiritualized” individuals manage to change their internal environment beyond recognition. Such Priora and do-it-yourself interior tuning in the photo look, in their opinion, like the dream of an Arab sheikh. However, there are quite reasonable options, including:

1. Replacement of covers and trim.
2. Modernization of seats and dashboard.
3. Acoustic noise insulation and installation of a powerful audio system.
4. Interior lighting tuning and painting of standard plastic elements.

When looking through the options, we must not forget that even for a substantial amount of money, the VAZ environment cannot turn into a Mercedes one. Therefore, you should plan modernization without much fanaticism; do everything modestly, but with taste.

Options for upgrading the VAZ-2170 dashboard

The dashboard of the Lada Priora sedan and the tuning in the photo looks quite decent, and even moreover, it is justified, since the factory lighting of the devices is not enough for many. There are several implementation options:

• Disassemble the panel and remove the standard coating from the lining numbers. After this, the signs on the shield will acquire a bright white glow.
• Stick red or any other inserts on the back of the glass for certain numbers. This focuses attention on the temperature scale and speedometer.
• Attach pieces of LED strip of certain sizes to the back side of the glass on the dashboard board. It is important to observe polarity when connecting the circuit to standard wiring.

What else can be done? VAZ 2170 owners can only dream of a full-fledged HUD projection screen , but something can be done. If you don’t like the green color of the display, you should disassemble it and remove the filter. This will make the backlight bright white, but you can install any other filter.

Some fans of tuning, at the same time as the general illumination of the instruments, also change the illumination of the speedometer needle. To implement this project, 10 SMD LEDs are sufficient: four to illuminate the tachometer and speedometer, and three each for the fuel consumption and coolant temperature scales.

How to soundproof the interior ceiling?

Another useful upgrade, because the acoustic comfort of the VAZ-2170 leaves much to be desired. High-quality sound insulation on the Lada Priora in the form of tuning the interior with your own hands may not be visible in the photo, so we will consider the issue in more detail. Craftsmen recommend starting from the ceiling; for work you will need 4-5 hours of free time and materials:

• Two sheets of splen 1.20 x 1.0 m, 4 mm thick.
• Two sheets of bitoplast.
• Three sheets of vibration damper.
• Mounting roller.
• Stationery knife and scissors.

The procedure begins with the dismantling of the ceiling cladding and standard sound insulation, after which the roof surface is degreased and vibrating material is laid as the first layer. The second stage is the installation of splen sheets, and only then – laying the bitoplast. The convenience lies in the fact that the sheets of material have an adhesive base, which needs to be heated with a hair dryer and “rolled out” with a roller.

Soundproofing the glove compartment and doors would be a good idea. The materials you will need are the same as for working with the ceiling; the technology is simple and quite accessible to anyone. It should be noted not only the improvement in acoustic comfort, but also the thermal insulation characteristics of the car.

Refinement of the interior lamp

Almost all available reviews from Lada Priora owners indicate that the standard navigation lamp does not provide good interior illumination. There are several practice-tested methods:

• Installation of a self-made platform according to the size of the lampshade, onto which the LED strip is glued. The wires are connected to the standard wiring.
• Replacing the stock ceiling lamp with an LED one.
• Replacing the standard lamp of a lamp with a module of LEDs, the brightness depends on the type and number of light elements in the block.

The last two tuning options for the domestic Lada Priora sedan are not noticeable in the photo, but this does not mean that they are ineffective. Modernization is simple, since you do not need to completely remove the lampshade, and does not require special devices and tools.

Upgrading seats

It is possible to radically transform the interior at minimal cost by changing car covers, which are sold in huge quantities. Leather products will cost a little more, but whether they make sense is up to the owner to decide. An alternative can be eco-leather, which has good breathability.

Reworking the backlight

Tuning the instrument panel primarily involves changing the backlight of the scales and the background of the panel.

Cleaning up pollination

To do this, the overlay, which is coated with paint from the inside, must be made completely transparent. We remove all pollination (usually green on the inside where the numbers are) using a sharp, rounded knife. After this, you need to wipe the pad with alcohol - it is better to use a cloth rather than a cotton pad.

In order not to spoil the overlay, it makes sense to first clean off a small part and see how the numbers show through.

Next, let's move on to the lighting itself. It's better not to use 3mm LEDs. They are not very reliable and burn out quickly, but they are best for shooters.

Laying LED strip

If in the future you plan to make a smooth ignition of the light, then already at this stage you need to take all the tapes in the panel of the same type 12-volt, single-color or multi-color. They will need to be cut. Only about 70 cm of such tape will be needed for illumination. Degrease the surface and place the parts of the tape. We seal them (plus to plus, minus to minus). We bring the wires through the hole to the bottom of the panel. We insert the light guide into place and fix it. Place the cover and turn on the power supply. If everything is done correctly, the backlight will shine evenly and as planned.

This is the easiest way to tune the Priora panel.

Do-it-yourself technical tuning of the Lada Priora car interior and photos of implemented options

A large field for experiments in the field of individual auto tuning is provided by RGB strips complete with drivers. The bright footlights for the front passenger and driver look good. Due to the control driver, the lighting intensity and color are adjusted. Is there any rational grain in this revision? Without fanaticism, such illumination will help you get out in the dark, but otherwise...

Audio tuning VAZ-2170

The standard VAZ audio system, as our audiophiles assure, does not meet high sound standards. Seriously, this is the case, and it would be nice to increase the diameter and install branded speakers by 16 cm. In some photos of tuning the interior of a Priora car with your own hands, you can see that the seat for the speakers in the doors will have to be cut. It is imperative to perform noise and vibration insulation of the door walls to avoid resonance phenomena in the future.

In addition to wideband speakers, experts also recommend installing tweeters. They are located on the dashboard or at the top of the door card. Broadband speakers are also installed for rear passengers, and to emphasize low frequencies, space for a subwoofer can be arranged in the luggage compartment.

Other technical options

If you are going to start upgrading your audio system, then it is advisable to turn your attention to some kind of full-fledged multimedia center with monitor outputs. This will already be a guarantee of high-quality playback of music tracks.

To all that has been said, it’s a good idea to add a good monitor that will not let you get bored in traffic jams and will allow you to relax in the parking lot during long trips. It wouldn't hurt to take a closer look at the range of on-board computers for Lada Priora.

Decor of plastic components

The sedan is equipped with a lot of plastic parts in the interior; fortunately, many of them have light colors and can be easily repainted. The process of painting plastic from an aerosol can requires not only a respirator and gloves, but also a degreasing liquid and a primer. During operation, it is important to prevent the formation of drips.

Another way to improve the appearance of plastic elements is to cover them with carbon film. According to many car enthusiasts, this material is durable and looks impressive. The blanks are cut with a margin of 20-25 mm at the edges, after which the film is glued to a degreased surface. Edges and curves are blow-dried to prevent kinks and kinks.

The inexpensive Russian Lada Priora sedan has replaced the generation of the famous VAZ “nines”. Its updated design appealed to admirers of the domestic automobile industry, but still tuning the interior of cars of this class of VAZ models is necessary.

What makes sports cars start quickly?

The car behaves confidently on the road

In order to start quickly, the car must be light. For example, Lada Priora, a sports hatchback, has a curb weight of 1088 kg and almost all parts of its body are made of galvanized or stainless steel. In global production, to reduce fuel consumption and increase the speed characteristics of sports cars, bodies are made on the basis of aluminum frames using composite materials and carbon fiber (40% lighter than metal), which allows, for example, the Hennessy Venom GT model to accelerate to 100 km/h. in two point seven seconds.

Of course, such fantastic acceleration occurs on supercars due to the fact that they have an engine of a different order than the Lada Priora. The same “Hennessy Venom” has 1244 horsepower under the hood and a volume of 6.2 liters versus ninety-eight “horses” of the Priora family. That is, the difference is more than 10 times, despite the fact that Venom weighs only 180 kg more and costs 100 times more than a product from the domestic automobile industry.

However, even for cars with the same engine displacement, acceleration to 100 can be achieved in different times. Sometimes even a Lada Priora can run faster than a more powerful model, which “wake up” only when the tachometer (determines the number of revolutions of the rotating parts of the car, its engine) approaches the middle of the scale. And the point here is the different elasticity of the engine, which is expressed in different torque characteristics.

Torque, as we know from school physics, is the product of the force applied to the lever and the length of the lever itself. In the Priora, like in other cars, torque occurs when the mixture of air and fuel, after pressing the gas pedal, burns in the chamber, and the vapors expand. Then the connecting rod mechanism translates the reciprocating movements into revolutions of the crankshaft - this is how rotation appears, realizing torque.

This vector physical quantity can be different at different speeds, and is involved in creating the traction force, which moves the Lada car when the traction overcomes the force of the car’s own gravity, air resistance, etc.

Tuning the Lada dashboard

Changed panel backlight color

Changes to the instrument panel will be the least noticeable visually, but will greatly help the driver set the buttons in the position in which he is comfortable. Doing this manually is quite problematic and extremely difficult without special skills. Therefore, it is better to order new panels in the store. What even a beginner can do is install LEDs.

Installing the backlight

For do-it-yourself tuning you will need:

• a set of LEDs (3 pieces per device) and resistors according to the number of lamps;
• conductor for connecting lamps;
• translucent material - plastic, polyethylene.

The following are fairly simple manipulations:

1. The panel is dismantled. Using a Phillips screwdriver, all fasteners are removed and the inside of the shield is exposed.
2. The instrument panel is disassembled piece by piece. The devices are carefully removed, disconnected from the power supply for the duration of work, and the sensor arrows are removed.
3. The panel trim is removed and will need to be updated.
4. If you want a pure white panel color, simply remove the green coating from the removed cover. To change the color, a colored translucent plastic insert or a piece of polyethylene is useful.

Lada Priora: new interior to suit your taste

The most noticeable thing in the interior of the Lada Priora is, of course, the seats. Selecting them is very problematic, since the factory models practically do not differ from the basic configuration. Therefore, you just need to improve the existing seats by upholstering them with new material. But it won't last long, especially if you want a leather interior. Therefore, it is better to partially replace the upholstery. For example, make inserts from a material of a different color. The interior of the new Priora driver's seat may have an irregular orthopedic shape. Therefore, it is worth replacing completely. The driver's seat should stand out from the rest of the interior. This will emphasize the importance and solidity of the Lada owner. Leather is best for this. For a sporty style, interior tuning must include the installation of a high racing seat.

For the convenience of passengers during long trips, there are special stands for a variety of items. The standard set includes a hole for a plate, a glass holder, and an additional hole of any shape. If this is available in the front seats, then the creators of the Priora deprived the rear passengers in this regard. Therefore, it is possible to install a mounting board on the front seats.

Eco-leather in the cabin

To separate passenger seats, install an armrest. You can install a cup holder in it. But it’s better not to do this, because in this case the armrest will lose its intended purpose. In addition, if you have a leather interior, the fabric on the armrest will quickly become unusable.

New covers - new seat

The covers are easy to install and at the same time significantly change the interior of the Lada device. Most often, they are used in a new car, so that when later sold, the seat upholstery remains in its original condition. A new cover will easily “update” the atmosphere and can add comfort. The most popular are fur covers. In winter, they warm the driver, and they are also much softer than the standard Priora seat upholstery.

It is not recommended to use bright white covers. After a short time they will become dirty, and it will be very noticeable.

It is also better to refrain from installing leather covers. They do not allow air to pass through well and cause active sweating in the driver. At low temperatures, such covers will “tan” and quickly become unusable. Therefore, the best option is universal covers. They will fit any seat model. You can purchase “station wagons” in almost any store at a relatively affordable price. The disadvantages include the likelihood of wrinkles appearing, which cause discomfort. Therefore, if you want to get maximum comfort, it is better to order a model case from specialists.

Improvements in the interior

Lux salon

If your car is not luxury, then you can give it this manually by purchasing an additional interior lamp from Priora Luxury, installing heated seats, sun visors from Luxury with a mirror. All these spare parts and accessories are sold in any car spare parts for Lada Priora.

Cases

Every car owner would like his car to remain in new condition for as long as possible. During use, seats are subject to a lot of wear and tear. In order to preserve the original appearance of the seats, it is best to put covers on them. There are a large number of different covers for taste and color. The cost of covers for a Priora varies from 1,500 rubles to 5,000 rubles, depending on the quality of the materials.

Steering wheel cover

With active driving, by 100,000 km, the steering wheel of the Priora begins to wear out. In order to protect it from wear and tear and an unsightly appearance, it is best to put a braid on the steering wheel. There are two types of braids that are put on the steering wheel and that need to be sewn together. Slip-on braids are easy to install, but do not completely cover the steering wheel. Stitched braids completely cover the steering wheel and protect it from damage, but are quite difficult to install.

Replacing Heater Switches

The interior heater switches in the Prior are not very nicely designed. In order to give them a more modern and beautiful look, they can be replaced with switches from Ford Focus. Such switches are not expensive and fit into the place of the standard Prior ones without any modifications. You can order them on AliExpress.

Rugs

Most of the time a person is inside a car. Therefore, it is important to maintain the frequency there. To do this, we will be helped by special EVA mats that perfectly retain moisture, unlike standard ones, and do not allow it to spill outside the mat. This is very important in winter, since snow that gets into the car with your feet begins to melt and form puddles in the cabin that can spill and an unpleasant smell of dampness in the cabin cannot be avoided.

Side mats

You can also install side mats between the door and the seat to protect your carpet from dirt. Such rugs are not expensive, around 400 rubles.