Rear brake pads Lada Largus 8 and 16 valves with ABS - replacement, article number, price

Payment for goods and downloading of the book in electronic form (PDF format) is made on the website.

To do this, you need to find the book you are interested in and click on the “Buy” button. The price of the book is indicated on the button.

For convenience, the price on the website for residents of Russia, Belarus and Kazakhstan is presented in rubles.

For residents of Ukraine in hryvnias, and for all other countries - dollars.

After clicking on the “BUY” button, a payment window will open where you can select a payment system with which you can pay for the selected book using any bank card (Visa, MasterCard, MIR, etc.)

When you click on the “Pay by bank card” button, the Portmone payment system will open, which is the easiest way to make a payment.

In addition, the website offers four payment systems for payment:

• Yandex (payment from any bank cards, Yandex Money account, QIWI Wallet, terminals, etc.);
• Portmone (payment from any bank cards, Portmone account);
• PayPal (payment from any bank cards, PayPal account);
• WebMoney (payment from any bank cards, payment from WebMoney wallets).

Payment via Yandex Cashier

After selecting payment via Yandex, the Yandex Cashier payment system will launch, where you need to select a convenient payment method (bank card, QIWI, Yandex Money account, etc.)

After specifying payment details and confirming payment, payment for the goods will occur.

If you have a bank card in a currency other than the ruble, then the money will be debited from the card at the rate of the Central Bank of Russia at the time of the purchase.

This payment method is optimal for residents of Russia, Kazakhstan and Belarus.

Official website of the Yandex Kassa payment system https://kassa.yandex.ru

Payment via Portmone

After selecting payment through Portmone, the payment system will launch, where you need to select the payment method: bank card or Portmone account.

The price in the Portmone payment system is converted into dollars at the exchange rate of the Central Bank of the country where you are located.

If you have a bank card in a currency other than the dollar, then the money will be debited from the card at the rate of the Central Bank of your country at the time of the purchase.

After specifying payment details and confirming payment, payment for the goods will occur.

Official website of the Portmone payment system https://www.portmone.com

Technical characteristics of the ball joint on Largus

The ball joint consists of a main load-bearing element - a pin made of high-carbon steel. On one side there is a sphere, and on the other there is a groove for mounting with a steering knuckle. The spherical part of the finger is located in a metal case filled with polymer, which dampens vibrations and shock loads when the car is moving. The support body is pressed into the suspension arm, and a boot is placed on top of it to prevent dirt and dust from entering.

The ball joint on Largus models produced before June 2013 had a pin with a diameter of 16 mm and an annular groove. In the supports that are installed on new models, the pin diameter is 18 mm, they have a side groove.

In fulfilling their purpose, ball joints are subjected to heavy loads, so stringent requirements are placed on their design and manufacturing technology. The support pin must withstand a pullout force of up to 5 tons

To ensure the high quality of this important unit, GOST 52433-2005 “Ball joints. Technical requirements and test methods”, which should guide both Russian and foreign manufacturers

There is a wide variety of ball joints on the aftermarket market. The most reliable and best-selling brands are:

• Febi, Germany;
• Monroe, USA;
• Ruville, Germany;
• Delphi, USA;
• Mapco, Germany;
• Meyle, Germany;
• Tork auto, Türkiye.

With the same quality of supports, their cost on the market can differ by up to 40%. The choice of one brand or another depends on the personal preferences of the car enthusiast.

Payment via PayPal

After selecting payment via PayPal, the PayPal payment system will launch, where you need to select the payment method: bank card or PayPal account.

If you already have a PayPal account, then you need to log into it and make a payment.

If you do not have a PayPal account and you want to pay using a bank card via PayPal, you need to click on the “Create an Account” button - shown with an arrow in the picture.

PayPal will then prompt you to select your country and provide your credit card information.

After specifying the information required to make the payment, you must click on the “Pay Now” button.

Official website of the PayPal payment system https://www.paypal.com

Payment via WebMoney

After selecting payment via WebMoney, the payment system will launch, where you need to select the payment method: bank card or WebMoney wallet.

If you already have a WebMoney wallet, then you need to log into it and make a payment.

If you do not have a WebMoney wallet and you want to pay in another way, you need to select any of the methods that WebMoney offers and make the payment

After specifying payment details and confirming payment, payment for the goods will occur.

Official website of the WebMoney payment system https://www.webmoney.ru/

Downloading a book

After successfully completing the payment (by any method) and returning to the KrutilVertel store from the payment system website, you will be taken to the successful payment page:

On this page you need to indicate your e-mail, where access to download the book will be sent.

If you are already registered on our website, then simply follow the link to your personal account.

The book you purchased will be in your personal account, from where you can always download it.

Please note that after making the payment, you need to return back from the payment system website to the KrutilVertel website.

If for some reason you did not return back to the site and closed the payment system tab with a message about the successful completion of the payment, please let us know - we will send you a letter indicating access to download the book.

Diagnostics of the ball joint condition

Symptoms of the need to pay attention to the Largus ball joint are:

• there was a need to apply additional force when turning the steering wheel;
• driving over bumps, for example, a speed bump, is accompanied by a knocking sound from the front suspension;
• Uneven tire wear was detected;
• entering a turn is accompanied by extraneous sounds coming from the wheel arches;
• the steering wheel turns with a creaking or grinding sound;
• the car has become less obedient when entering a turn;
• When driving over bumps, controllability partially decreased and the car became unstable.

If you have the above symptoms, it is recommended to use the following algorithm for finding a ball fault.

• Hang it in front of Largus.
• Take the tire from above and below.
• Check that there is no play. To do this, you need to shake the wheel in a vertical plane. It should be borne in mind that the cause of movement may be not only the ball joint, but also worn steering tips or stabilizer links.

The main load-bearing element of the ball joint is the pin. It is made of high carbon steel. On one side of the finger there is a sphere, which is located in a metal case. It is filled with polymer or grease. To prevent moisture, dirt and dust from entering, a protective cuff is placed on top.

Abrasive particles and water pass through the boot freely if it is damaged. The sphere and its seat are subject to intense wear, and the lubricant dilutes and ceases to perform its functions

Therefore, when diagnosing a ball, it is important to pay attention to the condition of the boot. If cracks, punctures, holes or other holes are found, the support must be replaced.

Problems when paying with bank cards

Sometimes difficulties may arise when paying with Visa/MasterCard bank cards. The most common of them:

1. There is a restriction on the card for paying for online purchases
2. A plastic card is not intended for making payments online.
3. The plastic card is not activated for making payments online.
4. There are not enough funds on the plastic card.

In order to solve these problems, you need to call or write to the technical support of the bank where you are served. Bank specialists will help you resolve them and make payments.

That's basically it. The entire process of paying for a book in PDF format on car repair on our website takes 1-2 minutes.

If you still have any questions, you can ask them using the feedback form, or write us an email at [email protected]

Replacing the ball joint Lada Largus: photos, videos, catalog numbers

The Lada Largus ball joint is very important in the design of the car. It adjusts the angle of the wheels. Damage to the support becomes a significant problem, since if it falls out on the road, it can cause damage to other elements of the car, and further movement will become impossible.

Ball selection, articles

In many ways, the operation of the car depends on the choice of spare parts for the suspension. Since the ball joint is responsible for the angle of inclination of the wheels at the moment of movement, the selection of this part must be taken seriously.

The original ball joint from Largus was removed during replacement. This code does not work on articles

Let's look at what ball joint options manufacturers provide for Largus:

The original catalog number of the ball joint is 401604793R. The average cost in the Russian Federation is 4500-5000 rubles.

Ball analogues

The catalog of substitutes is presented in the table below. All these parts can be installed on a car without fear of poor quality.

An analogue of the original ball for Largus from TRW with a circular groove

As you can see from the table, an alternative ball joint can be purchased for about 1000 rubles. The cost of replacing the part itself at a car service is about 1000-1500 per piece.

Video about choosing a ball joint for Largus

Replacing a ball joint on Largus

When the ball joint is selected, it can be installed on the Lada Largus. Experts recommend removing the lever to replace this part, but this is not necessary.

For ease of work, you can remove the front suspension arm

So, let's look at how to replace the ball joint:

1. Remove the finger from the steering knuckle.
   To do this, you need to remove the cotter pin and, with a little force (you can use a crowbar, leaning on the lever), remove the ball from the seat. Pressing the ball out of the lever
2. Using something, we hook the support by the shoulder, and after going through several places, we take it out. In this case, you should lean on the edge of the lever.
3. We place a large diameter tube or head under the lever so that a finger can fit inside, and insert the ball into the seat.
4. Now, we install the head and, striking with a hammer, press in the new part.
   The ball was inserted
5. Next, we collect everything as it was.
   Installing a new ball

Thus, the new ball joint is installed on the vehicle and is ready for use.

Peculiarities

Harsh operating conditions fall directly on the small ball joint. Thus, the entire body, passengers and cargo wear out this unit, or rather a small ball. In addition to this, additional stress is created by the road surface, which in the country, to put it mildly, is not in the best condition.

It is completely impossible to check the unit after installation, since the articular part of the ball joint is covered by a lever and a boot. Often, it is this joint that breaks when the part wears out.

Reasons for failure

There are several reasons why a ball joint can fail. Let's look at what conditions affect this:

To prevent consequences, it is necessary to regularly diagnose ball joints.

Diagnostic operations

How can you determine that a ball joint is approaching the end of its service life? To do this, it is worth carrying out basic diagnostics:

The first thing you need to pay attention to is the condition of the boot. If it has cracks or is torn, then it must be removed and the ball should be inspected. We hang the wheel a little and swing it up and down with our hands.

If there is play, then it’s time to replace the ball. The presence of a squeak, as well as heavy turning of the steering wheel, can also be signs that the ball joints are in critical condition. Instability in control, namely departure from the trajectory of movement to the left or right, with the steering wheel in a level position, indicates that the ball joint has failed.

It is impossible to accurately determine the condition of the ball joint, but these indirect facts indicate that it is necessary to carry out all diagnostic operations and replace the support.

The principle of replacing a ball joint on a Lada Largus is identical to that on all other cars with this design. Many car enthusiasts have changed this unit on their Lada cars, but to this day it remains the same. The service life largely depends on the quality of the part that is installed on the car.