How to install a sports steering wheel

Checking the steering play of the VAZ 2107

Large play in the VAZ 2107 steering wheel is a vague concept. Meanwhile, the permissible steering play has established standards. For “classics” it is 5 degrees. To check the backlash, a special device is used at the service station - a backlash meter. At home you can do without it. To do this you will need a ruler, chalk (or wire) and the help of a partner. Checking the amount of play is carried out as follows:

place the machine on a level surface;
check the tire pressure and inflate them if necessary;
align the steering wheel so that the wheels are directed parallel to the axis of the car;

Important: if the wheels are level, but the wheel spoke is skewed, then there may be a violation of the wheel alignment angles, and the presence of defects in the suspension and steering. The steering and suspension should be adjusted or repaired.

place the ruler so that it rests on the dashboard, touches the top of the headlight switch and, with the other end, touches the wheel rim;
smoothly rotate the steering wheel while your partner monitors the position of the front wheels;
as soon as the wheels begin to shift, stop turning the steering wheel;
make a chalk mark on the steering wheel opposite the ruler (or wrap the steering wheel with wire);
smoothly rotate the steering wheel in the other direction until your partner notices that the wheels have begun to turn;
make another mark on the steering wheel with chalk or wrap a second piece of wire around it;
measure the distance between the marks on the wheel rim.

How to set up the steering wheel and pedals

Instructions

Connect the steering wheel and pedals to your computer. These devices cannot always be directly connected via the USB protocol - for computers with insufficient power reserves, these input devices can become a heavy load. In this case, inexpensive USB hubs can help, which can be purchased at most electronics stores.

Immediately after connecting, you need to install the device driver. Most manufacturers supply their gaming kits with CDs with all the necessary software for the correct operation of the steering wheel and pedals. Although the steering wheel and pedals can be detected by Windows even without original drivers (like a USB gaming device), only the presence of “native” drivers guarantees full compatibility and functionality of the gaming system.

Calibrate the steering wheel and pedals. Calibration is fine-tuning your input system and is done through experience. The fact is that all computers have different characteristics (power, sensitivity, processor clock speed), versions of operating systems, and choosing the values of steering wheel rotation, pressing power, and response speed can only be done experimentally. Even Formula 1 test drivers perform similar operations on racing cars! To calibrate, open the “Control Panel”, select “Devices”, then “Game Devices”.

Open "USB Device Steering Wheel [manufacturer]". You can change the sensitivity by turning the steering wheel, pressing the pedals and selecting the desired parameters. You must move the slider to change the sensitivity and response speed. In the future, return to this settings panel to select the desired values for each car simulator.

Download and install a lightweight racing emulator. It is advisable to use a game with simple controls to master and adjust the steering wheel and pedals - this way you will be able to select the ideal settings and learn how to drive in the process. If you immediately try your hand at a difficult race, you may settle for little or lose faith in your abilities. The best emulator to start with would be any game from the Ford Racing series, FlatOut. Test races in Need For Speed: World are also good for testing your steering wheel and pedal settings. Play the race and evaluate the quality of the settings. Repeat calibration if inconvenience occurs.

Computer games with the ability to use a steering wheel allow the player to feel like a real driver. However, before you sit in the “driver’s seat”, you need to adjust the steering wheel.

You will need

A game that supports steering wheel control mode and the steering wheel itself.

Instructions

Installing a game that supports steering wheel controls. Insert the disc with the game you want to install on your computer into the drive. During installation, select the desired destination folder for the game, and then continue unpacking the files into it. Once the game is installed on your PC, you can start customizing your steering wheel. Connecting the steering wheel to a computer. In most cases, modern models of steering wheels are connected to the computer via a USB connector. The device is powered by a distribution block that is plugged into an outlet. First of all, connect the wires coming from the pedals to the steering base. Next, you need to connect the steering wheel to the computer using a USB cable, and only after that you can turn on the power supply to the network. Steering wheel settings. Launch the installed game, then open the “Options” section. Here you need to go to the Control Settings menu. In the window that opens, you will see three sections: “Mouse Settings”, “Keyboard Settings” and “Alternative Controls”. To configure the steering wheel, you need to open the “Alternative Controls” menu. You can understand the further process yourself - by clicking on the “Gas” action and waiting until the option to change the parameter appears, press the gas pedal. When changing the turning parameters, turn the steering wheel in the appropriate direction. You can also set specific parameters for the steering wheel buttons. After all changes, do not forget to save the new settings. Now you can fully enjoy the exciting ride around the virtual city.

Sources:

games using steering wheel

Due to the rapid development of the computer and gaming industry, new devices began to appear on the market for the expanded use of familiar computer games. These innovations include kits that include steering wheels and pedals. Today, some games require a steering wheel, which was also invented in parallel with its land counterpart. When connecting these innovations, problems may arise due to the lack of specific software in the operating system.

You will need

Interactive car driver kit.

Instructions

When installing this device, you should pay attention to the correct step-by-step connection. As a rule, the instructions that come with this device help to fully answer all questions related to the connection. You must connect the new device according to these instructions. If you have a disk with drivers, install them. The connection of this device can be continued with fine tuning. The Windows XP operating system includes a utility that can help you configure the steering wheel and pedals. Click the "Start" menu - select "Control Panel" - "Game Devices". A new “Game Devices” window will appear on the screen. This window displays a list of installed gaming equipment. If this is your first time installing gaming tools, the list will be empty. To add a new device, click the “Add” button.

In the “Adding a gaming device” window that opens, find the “Gaming devices” list and select the type of equipment to be connected. Check the box next to “Connect steering wheel and pedals” at the bottom of the menu.

In the window that opens, select the type of your device; if your device is not there, click the “Other” button. In the new window, select one of the following options: - joystick; - game pad; - steering wheel or control handle;

- driving a racing car.

Select the desired type and indicate the number of directions that will be used by your device (2 or 4). It is also worth indicating the number of buttons on the panel of your device. Among other settings, you can switch the view type (top view, cockpit view, rear view). To activate this mode, enable the “Has a POV switch” option. The last step in setting up a new device is to enter its name in the “Controller” field. Then click OK to return to the main Gaming Devices window.

After purchasing a car, the car owner may well have the need to adjust the car’s handling “to suit itself.” This concerns vehicle stability on the road, handling, braking systems, etc. Ease of use is perhaps one of the most important qualities that drivers look for when purchasing. However, it is impossible to choose a car with ideal parameters for each person. How to adjust the steering to suit you?

You will need

A car, a clear understanding of what you want to achieve from it and a little perseverance.

Instructions

Before you adjust the steering sensitivity, you need to clearly know and understand exactly how the car should behave on the road. Almost every driver has his own specific driving style. Write down on a piece of paper the main characteristics that the steering wheel should have. For example, play that is acceptable to you, reaction to sharp turns, change in direction of rotation. Go to a car service center and, with the help of a specialist, find out what exactly needs to be adjusted in the car to suit your needs. A short test drive with a service representative is ideal for this. As a result, you will explain to him in accessible language what you want to achieve from your car. Discuss absolutely all the details related to adjusting the steering sensitivity with a specialist who will carry out the work on setting it up. It is advisable to reflect on paper everything you agree on. This will save you from unnecessary disputes and disagreements during the work acceptance process.

Video on the topic

note

Be sure to supervise the work of the car service technicians if the adjustment is to be thorough, scrupulous and very delicate. Lack of attention on your part to this process can lead to work being completed inaccurately, not on time, or with deviations from preliminary agreements.

Helpful advice

You should not adjust the steering sensitivity yourself if you do not have the necessary qualifications in this area. This also applies to everything else related to the process of driving a car. Remember that unqualified intervention in the operation of your car's mechanisms may be unsafe for driving.

Thanks to computer games that support the use of a steering wheel, the player can feel like a real driver. However, before you take the driver's seat, you will need to properly configure this feature in the game.

Instructions

Install a game that supports steering wheel controls. Insert the game disc into the drive. During installation, you will need to select the required folder where the game will be located, after which the files will continue to be unpacked into it. After installing the game on your PC, launch it and start setting up the steering wheel.

Connect the steering wheel to the computer. Most often, modern models are connected via a USB connector. Insert the distribution block that supplies power to the device into the outlet. First of all, connect the wires that go to the steering base from the pedals. Next, connect the steering wheel to the computer via a USB cable and then plug in the power supply.

Adjust the steering wheel correctly. After launching the installed game, open the “Options” subsection. In it you need to select the “Management Settings” item. Once the window opens, you will see sections such as Keyboard Settings, Mouse Settings, and Alternative Controls. Depending on the version of the game, menu items may be named differently.

Open the “Alternate Controls” menu to configure the steering wheel. Click on the action under the “Gas” heading and wait until the option to change the parameter appears on the screen. After that, press the gas pedal on your steering wheel and you can lock the selected action. To change the turning parameters, you will need to turn the steering wheel in the appropriate directions. In addition, you can also set additional useful parameters available in the game and “hang” them on the steering wheel buttons.

Save the new settings after you have made all the changes. Start a new game and check how the steering wheel works. Some device models may not respond quickly and smoothly to the player's actions. But after making several trips, you will “develop the steering wheel”, after which all the inconveniences will go away on their own.

Sources:

how to install the game correctly

Sources:

TOP best gaming steering wheels for car simulators from Logitech

www.kakprosto.ru

Causes of steering play in VAZ 2107

If you notice unacceptable play in the VAZ 2107 steering wheel, the reasons may be as follows:

The central nut securing the steering wheel to the axle is not tightened;
the nut securing the steering column to the gearbox is loosened;
The worm gear of the steering mechanism is not adjusted;
the steering pendulum bushings are worn out;
The tie rods are damaged or their ends are worn.

All of these problems require immediate intervention. Otherwise, the steering mechanism may fail and the car will lose control.

How to assemble a steering column?

Before proceeding with specific actions, it is necessary to thoroughly wipe the chamfers for installing bearings with a piece of cloth, ridding them of oil and dust. It is also recommended to check the surfaces for chips, chips, and other damage. If defects are detected, the bearing seat rings will have to be removed and replaced. If you ignore the problem, damage will soon appear on the bearing balls.

Now let's get straight to work. First, fill the bearing chamfers with grease. It is recommended to use thick material for this. Assembly must be done starting from the lowest bearing. The latter is recessed into the seat. In this case, the separator should be in the upper position, and the balls should be laid down.

Next, a dust-free and lubricated steering column counter bowl is installed on the bearing. An O-ring is also placed here, which will protect the internal space from the penetration of contaminants.

Then you need to turn the bike frame over. After this, the upper bearing is installed according to the same principle as the lower one. The seat is locked with a boot. Finally, the outer seal and thrust washer are installed. Additional rings are put on the steering column, the number of which depends on the frame parameters and the size of the fork tube. The steering wheel is mounted on top of the rings. Then the washer is tightened and secured with a bolt.

How to remove steering play on a VAZ 2107

You should begin work by checking the tightness of the threaded connections of the steering mechanism and the condition of the steering rods (tips). Bent rods or worn tie rod joints must be replaced. To do this, you will have to use a puller and a 22mm wrench. You should not try to align the rods or repair the ends. For safety reasons, these parts should always be replaced with new ones. Next, you should check the condition of the pendulum and the adjustment of the worm gear. Worn pendulum bushings must be replaced with new ones. To do this, you need to unscrew the steering rods from it (use a 22mm wrench and a puller) and remove the pendulum from the car by unscrewing the mounting bolts. Clamp the pendulum in a vice, remove the cotter pin and unscrew the adjusting nut. Once the nut is unscrewed, you can disassemble the pendulum and replace the worn bushings with new ones. When assembling the pendulum, it is necessary to tighten the adjusting nut so that its bipod rotates with a force of 1-2 kilograms. If all parts are replaced or in good condition, and the threaded connections are tightened, the VAZ 2107 steering play is adjusted by adjusting the steering gearbox. To do this, you will need a 19 mm wrench and a powerful slotted screwdriver. The adjustment is carried out as follows:

align the wheels, setting them in a position corresponding to straight-line movement;
clean the steering gear cover from dirt and oil stains;
remove the protective cap from the adjusting screw;
Using a 19mm wrench, loosen the locknut securing the adjusting screw;
Use a screwdriver to tighten the adjusting screw, reducing the backlash of the steering gear;
tighten the locknut while holding the adjusting screw with a screwdriver;
check whether the steering wheel rotates easily and whether the play is within acceptable limits;
repeat the adjustment if necessary.