How to blacken rubber at home

Effective do-it-yourself blackening of car rubber with glycerin and mixture recipe

Of course, homemade rubber dye is usually not included in the rating. However, car enthusiasts claim that the effectiveness of self-produced formulations is sometimes even higher than that of expensive store-bought drugs. There are several home methods for blackening tires:

Emulsion based on glycerin and water.
A mixture including Coca-Cola, shoe polish and glycerin preparation.
Black shoe polish or shoe polish.

Let's look at method No. 1. Glycerin is available at the pharmacy. Moreover, it is quite inexpensive - only 15-20 rubles per bottle. One bottle contains 25 ml of liquid. Anyone who carefully monitors the labels of their purchases knows that this is:

Polyhydric alcohol obtained by breaking down animal fats and oils.
The main component of 95% of branded tire ink.

Speaking about the production means for blackening tires, it is worth noting that the container also contains water and fragrance. It’s one thing to choose the right fragrance for a car to create comfortable conditions, and another thing is to create an external aroma. The latter does not affect safety in any way, but rather makes passengers feel comfortable about the car. Therefore, the smell of an aromatic additive in a store-bought sprayer is, for the most part, of no importance, because it is effective for a short time, and the driver does not feel it.

Method No. 1

The preparation of homemade blackener is carried out in a bottle, which is subsequently equipped with a spray nozzle. This makes it more convenient to apply homemade emulsion. Glycerin and water are mixed in a ratio of 1:7.

For your information. The ratio of components is optimal, found in practice. Mixing 1:1 is not recommended. Yes, the effect will be amazing - the product will sparkle. But glycerin in its pure form has a negative effect on rubber, drying it out. Therefore, the less it is, the better.

TOP 10 professional means for blackening car tires

Professional tire blackening products have different compositions and quite a wide range of prices. Based on their composition, they can be divided into two groups - water-based and silicone. Most are made on a silicone basis.

This ink gives tires a beautiful appearance, but has several significant drawbacks. When the solvent evaporates, a film of silicone remains on the surface. It does not allow air to pass through, which is why the rubber dries quickly. In addition, the silicone coating attracts dust more strongly. It is best to use it in winter or during seasonal storage of a set of wheels.

Water-based blackeners contain polymers and natural oils. Almost all manufacturers include UV protection in their composition. Water-based coatings do not provide such a black gloss as silicone ones, but they more effectively protect the rubber on a car from external adverse influences. It is preferable to use water-based inks in the summer.

According to reviews from car owners, the best ink is Meguiar's G75 Endurance Tire Gel conditioner. To obtain a matte black color, simply apply it in one layer. If you want the wheels to become glossy, repeat the treatment 10 minutes after applying the first coat.

Advantages:

gives a glossy shine and deep black color, repels water and does not attract dust;
withstands up to three washes;
economical.

A 473 ml bottle costs about 1,300 rubles. But Meguiar's G75 Endurance Tire Gel is used so sparingly that it will last you more than one year. As a result, it is cheaper than the most budget ink.

Chemical Guys Blue Guard II Wet Look Premium Dressing Protective Spray is made with natural oils and is used for more than just tires.

Read more: How to Determine a Malfunction of the Air Flow Sensor. Signs, Checking, Buying a Mass Airflow Flow

Advantages:

protects against drying, cracking and fading, repels water;
restores color and even covers the brown tint of old tires;
provides long-term protection – can survive up to 3 washes.

Flaws

high cost and lower efficiency compared to the previous product.

Blue Guard II Wet Look Premium Dressing is not much cheaper - about 1,200 rubles for a 473 ml bottle.

The tire restorer from the Doctor Wax brand is an excellent example of the balance between price and quality.

Advantages:

returns the original shine and color to tires and exterior parts;
protects rubber from ultraviolet radiation;
instantly restores elasticity, fills microcracks and hides minor defects.

Flaws:

withstands no more than two washes;
quickly consumed.

With an average cost of 480 rubles per 300 ml, the product shows good results. You can’t call it a budget product at all, but the high quality is worth it.

Another product from a well-known brand provides protection for rubber, leather, vinyl and plastic. Among its advantages, car enthusiasts include versatility - you can update different elements from one can. The polish is water-based and gives parts and wheels a matte black color.

Advantages:

the consistency of the emulsion allows you to use polish economically;
regular use provides reliable protection, since “Natural Shine” has a cumulative effect;
prevents aging of materials, repels water, dust and dirt;
protects from sun rays.

Flaws:

low durability - the polish is washed off after the first wash;
not a small price.

Price - about 900 rubles for 473 ml. True, the high cost is compensated by the low consumption of ink.

C.Quartz Perl Coat is water based and solvent free.

Advantages:

restores faded surfaces;
has water-repellent properties;
protects against ultraviolet radiation;
Suitable not only for tires, but also for engine blackening, cleaning and protecting plastic;
The coverage lasts up to three months.

Each surface has its own concentration. Tires are treated with a 1:1 aqueous solution. It is better to apply it with a microfiber cloth, although the instructions recommend using a sponge. The fabric allows you to better work out surface unevenness.

Flaws

The price of ink is quite reasonable - about 400 rubles per 500 ml.

Koch Chemie PLAST STAR siliconolfrei is a professional care product for tires, door seals and external plastic elements. It does not contain silicone, instantly saturates rubber, restores elasticity and renews the surface of tires, giving them a rich black color and deep gloss.

Advantages:

low consumption and ease of processing;
100% absorption of the product by rubber.

Flaws

For independent use it is supplied in a 1 liter container costing about 1300 rubles.

Poorboy's World Bold N Bright is a water-based tire conditioner. It is designed specifically for tire renewal and has a gel-like structure.

Advantages:

economical and easy to apply;
does not contain petroleum distillates and does not harm tires;
protects against ultraviolet radiation;
saturates and softens rubber well;
has a pleasant smell.

Read more: What to do if the immobilizer does not see the key: how to register it and make a duplicate, programmers

Flaws

After treatment, the surface becomes matte black. The gel does not leave a greasy shine or oily film.

Average price – 1200 for 473 ml. According to car owners, the effect lasts up to three months.

The Soft99 BLACK BLACK blackening kit includes paste, solvent and two applicators of different hardness. Washed wheels are first treated with solvent, then with paste. In the instructions, the manufacturer (Japan) promises that the coating will last up to 3 months. In reality, it lasts about 30 days on our roads.

Advantages:

has good antistatic and excellent hydrophobic properties;
Gives rich color and moderate gloss.

Flaws:

requires double application;
You can work with ink only with gloves;
It is quite expensive - about 900 rubles for 110 ml.

The good news is that the product is used sparingly - one bottle is enough for four treatments.

Price - from 900 rubles for 110 ml.

Turtle Wax WET N BLACK AERO, popularly called “Turtle”, is popular for its ease of use. Just shake the can and spray the ink onto the wheels.

Due to the lack of water in the composition, “Turtle” dries in 2 minutes. It will last about a month.

Advantages

good durability
dries quickly

Flaws

high price
high consumption. One bottle is only enough for two treatments.

About 1000 rubles for 500 ml.

A Russian manufacturer produces a water-based wheel blackening agent GRASS BLACK RUBBER PROFESSIONAL. It is convenient to use, safe for tires and humans, but exhibits weak hydrophobicity.

Advantages:

convenience and speed of processing;
gives rubber antistatic properties and prevents cracking;
low price - about 350 rubles per 1 liter.

Flaws:

Weak water-repellent effect. It lasts until the first rain or wash.

In dry weather, the product will last on rubber for up to 7 days.

The price is about 350 rubles per 1 liter.

The auto chemical market offers car owners a huge selection of ready-made, high-quality tire ink. Many of them give excellent and long-lasting results, even at a low cost. In this case, is it worth spending time and money (sometimes comparable to the cost of finished products) on homemade compounds of dubious effect? The choice is yours.

Darker than the night: how else to make ink for any rubber at home using improvised materials

A significant drawback of the described method of making tires black is that they attract dust. If in a ratio of 1:7 this does not happen so intensely, then in a ratio of 1:1 it falls almost immediately. The use of Coca-Cola, according to private experts, can solve this problem.

Method No. 2

This blackening of rubber is done by hand with glycerin, shoe polish/black shoe polish and Coca-Cola. The cooking method is simple:

Pour 0.5 liters of drink from a two-liter bottle of Coca-Cola.
Add 8 bubbles of glycerin to a container with 1.5 liters of sweet water.
Inject shoe polish or cream into the resulting mixture.
Mix.
Screw the spray bottle onto the container.

Method No. 3

The overall disadvantage of the methods provided is poor resistance to water. The tire shoulders lose their black shine the first time they are washed or rain. Yes, they remain clean, but the rich shade is not visible. The method of blackening tires with shoe polish does not have this drawback.

Total

You can buy tire ink, or you can make it yourself. In the store you will have to pay at least 200 rubles. The cost of a homemade product is estimated at much lower numbers.

So, a simple composition based on glycerin and water, diluted 1:7, will cost about 15-20 rubles - the cost of one bottle of alcohol composition, which is more than enough for one treatment. The recipe with shoe polish, glycerin and cola is much more expensive, but the result is more durable. An alternative is to treat the tires with shoe polish or black shoe polish. The view is good and resistant to water.

Tire blackening is the treatment of tires with special coloring agents. This can be done not only as pre-sale preparation, but also for everyday use of the car. Blackening will give the car a well-groomed appearance and make it stand out from the gray mass.

How to blacken tires in a car?

Caring car owners spend a lot of money to make the rims and tires on their car look beautiful and expensive. You don’t need to buy expensive products; you just need to know a few life hacks to blacken the tires of your car’s wheels. You can prepare the products yourself at home; there is nothing complicated in preparation. All you need is a couple of inexpensive drugs and accuracy.

Methods for blackening rubber using special means

To blacken tires, you can purchase the following products in a store or car market:

DoctorWax is a tire restoration product. Can also be used for interior mats and door seals.

protects tires from aggressive road chemicals;
renews the appearance of rubber, gives a fresh shine;
has water-repellent properties;
economically used.

the effect does not last long;
The bottle is not convenient - it leaks when applied;
prolonged rain deteriorates the color of the rubber and removes its shine.

XADO Red Penguin “Rubber Blackening” is a product for restoring the original color of tires and plastic.

gives a rich black color;
the effect lasts for a long time;
fills scratches and microcracks;
no additional polishing required after application.

Cons: not noticed by buyers.

Turtle Wax Black Gloss is a tire polish that gives tires a deep black color and moisture. Just spray the product on the side of the tire and wait 10 minutes for it to dry.

After application, there is no need to additionally rub with a cloth;
has good antistatic properties - dust and dirt do not stick;
has a water-repellent effect;
black color and shine last up to 1 week, even if exposed to rain;
moisturizes rubber and makes it more elastic.

must be applied carefully; getting the product on the tread can worsen braking;
Plastic surfaces should be avoided.

Conditioner-cleaner HI-GEAR HG5331 - works without a brush and water, you just need to apply it to the side of the wheel. Recommended air temperature is from +15 to +25 degrees.

can be applied to a slightly dirty wheel, cleaning only large pieces of sand, if any;
the resulting film repels water and sand;
The bottle is easy to use.

takes a long time to dry;
there is no effect of the promised shine;
Cannot be used in cold weather.

Tire product "JSC NIII".

Do-it-yourself blackening of tires on a car

Every car enthusiast who looks after his car pays attention not only to its technical condition, but also to its appearance. To improve the aesthetics of a car, blackening rubber has become quite popular today. Since different means can be used for this procedure, their use needs to be understood in more detail.

Why denigrate

The main goal of blackening tires is to extend their service life, since rubber is subjected to high loads during operation. Due to the fact that the main part of our roads is far from ideal condition, such negative factors as stones, sand, salt and chemicals have a detrimental effect on the condition of the rubber, as a result of which microcracks and abrasions appear on it. Thanks to the blackening of tires, it is possible to protect the wheels for some time from various types of influences (burnout, cracking, adhesion of dust and dirt).

The advantages of the procedure include:

rubber is protected from contamination;
minor defects are hidden;
Tire wear is reduced.

The main disadvantage of blackening is the need to periodically repeat the procedure, which depends on the conditions and intensity of use of the vehicle. In addition, such tire care requires a certain time and physical investment.

Blackening in the service or with your own hands

Today, many car repair shops offer tire blackening services. Specialists carry out the procedure in several stages:

washing and drying wheels;
applying a special product;
final drying.

If blackening is done correctly, the machine can be used in just a few minutes. The cost of this type of wheel treatment depends on the specific service and starts at 50 rubles. When self-care, the price and profitability of the procedure will be influenced by the substances used and the frequency of its implementation.

How to blacken rubber

You can blacken stingrays using special compounds or folk remedies.

Special means

For the summer period, you can use water-based solutions, but for winter it is better to use silicone ones. Store-bought inks are divided into two types:

shiny. They are lubricants based on a large amount of silicone. The application of such products makes the rubber shiny and attractive. However, after dust adheres, the shine disappears and the original appearance is lost;
matte. Such products are used not only for tires, but for the entire car. Applying the liquid to the rubber gives it a deep black color. The disadvantage of this treatment is the short duration of the effect. Upon contact with water, the appearance of the element becomes worse than before treatment.

Traditional methods of blackening rubber

The following tools are widely used among motorists:

Silicone oil is the best folk remedy for tires and other rubber car parts.

The PMS-200 brand is usually used. The oil has a medium viscosity and is easy to apply to the wheel. A jar will cost more than ready-made special products, but it is enough for a year of regular use.

long lasting rubber “renewal” effect;
UV protection;
preventing drying out;
protection against condensation and dust.

No cons were noticed.

To rub tires, you need to buy 5 cans of glycerin, 25 ml each, or 3, 40 ml each, at the pharmacy. Mix with water in the following proportions:

for oily shine and deep black shade 1 to 3, where the first number is glycerin;
shine – 1 to 5;
haze – 1 to 7.

The more glycerin, the stronger the shine. But there is a big disadvantage - a lot of dirt will stick.

cheapness, efficiency, accessibility;
can be used frequently;
speed of preparation of the mixture;
Can be used on any car surface.

does not prevent rubber from cracking;
after the first rain it is washed off almost completely;
sand sticks quickly.

Shoe polish or shoe polish with wax. To liquefy shoe polish, you need to dissolve it in a small amount of kerosene.

is in every home;
easy to use;
inexpensive.

there is no shine, there is only black coloring;
takes a long time to dry;
need to be rubbed additionally with a napkin.

Laundry soap

To rub the wheel you will need more water and a brush with medium hardness.

Pros: availability, low cost, ease of tire processing.

The downside is that soap dries the rubber a lot, so this method can be used for a short time, for example, to sell a car.

You need to wash the wheels with Mister Muscle or a similar product. Screw a spray bottle into a bottle of Coca-Cola and spray the tires, then rub. If you make a thin layer, the rubber will not be sticky. After several procedures, the rubber will color and become like new.

You need to choose any of the listed methods based on the purpose of blackening the wheels. If you need protection and durability of rubber, the choice should fall on a high-quality special product or regular silicone grease. For a one-time effect, any option is suitable, especially with material limitations.

Methods for blackening tires at home

To carry out this procedure yourself, the easiest way is to buy a specialized liquid for blackening wheels at a car cosmetics store. The cost of the “potion” starts from 200 rubles. You can use this liquid every day right at home; it does not harm the tires. On the shelves you will find glitter products that contain large amounts of silicone. The advantage of such liquids is the appearance of the wheels after treatment. They become more shiny, but when dust or dirt gets in, the shine is instantly lost. Other fluids - matte - allow you to achieve a deep black color of the wheels. However, after contact with water, the appearance of the tires becomes even worse than before blackening.

Among folk remedies, treating rubber with silicone oil is especially popular. The main advantage of this method is its long-lasting effect. In addition, the oil counteracts ultraviolet radiation and protects tires from drying out, dust and condensation. This liquid is mainly used for blackening all-season tires.

user photo 110km

Composition with glycerin

The most popular method of preparing tire blackener is with glycerin. You can buy glycerin at the pharmacy, usually a bottle contains about 25 ml of liquid, but there are also larger containers of 40 ml. You will need 5-7 such containers.

We perform the following actions:

For example, let’s buy 5 bottles of 25 ml each;

Let's take a spray bottle from a preparation for washing glass or cleaning a windshield wiper. You need to fill all 5 bottles there;

The proportion with water is important. Non-professionals dilute glycerin in water in a ratio of 50x50. At least, such recommendations are given on the Internet, we will act according to these instructions;

Then all that remains is to paint the tires.

However, experts often conduct experiments. Some people try to create a fattier mixture with a ratio of 3 water x 5 glycerin. This mixture will turn out fatty, and its volume will be smaller. Or, on the contrary, to obtain a larger volume of the mixture, you need to reduce the fat content; the proportion can be 8 water x 5 glycerin. The parameters can be shifted a little, but you shouldn’t concentrate too powerfully. In the case of a greasy mixture, first spray it on a sponge and then rub the tire.

What can you find in the store?

Since many today are interested in how to make rubber ink with their own hands, there is a demand for the product itself. But it’s worth understanding the characteristics and types of such “cosmetics” for the car. You should start with something simple; of course, purchasing a ready-made product is easier and more convenient than creating your own. You can find two types of ink in stores.

Brilliant products. These preparations, which, as a rule, will be lubricants with silicone, can create an almost real mirror shine on the tire. They have a long service life and the wheels can be washed several times. True, they cannot be called ideal. Such products get very dirty, and it will take a lot of time and effort to wash this composition from your hands. If such a mixture is applied carelessly, even the car itself will then have to be thoroughly cleaned, which will require even more effort.

Matte. These types of mixtures do not allow you to notice your reflection on the tire, as you can do with a mirror, but they will make the color of the tire “noble” and bright. After this blackening, the tires will look amazing. This method of blackening also has disadvantages: the mixture will have to be renewed quite often, it wears out faster than silicone, in addition, it is not protected from water (that is, it is very easy to wash off). Also, matte inks can absorb quickly, even without use.

Why blacken car tires?

Blackening rubber is a simple procedure for treating wheels with a special product. It is needed to make the wheels black again. Each of the blackening methods is based on applying a layer of a special protective substance to the rubber, most often silicone, which provides protection from dust and dirt.

To do this yourself, just choose one of several tools available on the modern market. And you can avoid the cost of an expensive solution using methods from the DIY series - do it yourself.