Replacing the door handle of a VAZ 2114 avto-ladyrb.ru

Replacing the outer door handle of VAZ 2114 and 2115

The design of external door handles on VAZ 2113, 2114 and 2115 cars is quite reliable if we consider the old-style handles.
But there are often problems with new, so-called Euro pens. But in this article we will look at the replacement of external handles using the example of old-style cars. In order to make this repair yourself, you will need the following type of tool:

8 mm head
extension
ratchet handle or crank
screwdriver short flat

Replacing the door handle of a VAZ 2114 external driver's door

That's exactly what happened. He pulled it, but it remained in his hand. (Photo 1)

There are several videos and simple text on the Internet on how to replace this handle. But, in fact, there is no need to read there, everything is clear, except... Now I’ll try, step by step, for dummies, to tell you how to replace the inner handle of a VAZ 2113-15. We will need 2 screwdrivers (Phillips and flat head) and a lot of patience.

Photo 2. The first step is that we need to remove everything from the door that prevents us from removing the door card. Namely, this is the handle (2 Phillips bolts), the door latch (not included in the frame, the top of which blocks the door) and the plastic between the card and the handle itself, which we are changing.

Removing and installing the outer door handle on VAZ 2113, 2114 and 2115

The first step is to remove the door trim. After this, access to the lock mechanism and its rods from the inside opens.

Now unscrew one nut securing the handle from the inside, as shown in the photo below.

The second nut is located on the outside:

From the outside, move the handle slightly to the side, as shown clearly:

And then it is necessary to disconnect the two rods from the handle mechanism of the VAZ 2114-2115 from the inside. This can be done using a flat screwdriver, and the shorter it is, the more convenient it all is.

The rods are hinged, so you will have to apply moderate force to disconnect them from the lock mechanism. After which you can finally remove the handle and replace it with a new one.

It is worth noting that the price of a new factory handle for the front doors is around 300 rubles, but the rear ones can be bought a little cheaper - from 200 rubles apiece. Installation occurs in the reverse order of removal.

The process of replacing the internal door handle on a VAZ-2114

One of the simplest operations is replacing the door handle from the inside. So, motorists often figure out what needs to be done.

Broken interior door handle.

But, nevertheless, we will describe the complete technical replacement process:

By prying and pulling with a screwdriver, we remove the door handle trim.

We remove all elements including the handle trim.

We remove the door card.

Disconnect the drive rods from the handle.

We install a new handle and attach the rods.

Exterior door handle replacement process

Many car enthusiasts think for a long time about how to approach the replacement process, but everything is much simpler than it seems at first glance. To determine the fastening method, just look at the technical documentation, where you can clearly see that the door handle is attached inside.

Based on this, one can logically guess that in order to remove the outer door handle, it is necessary to dismantle the door trim. Next, the process will follow the same pattern:

When the casing is dismantled, remove the thrust rods from the handle lock.

Remove the door handle thrust rods from the frame

Unscrew the screws securing the rods

Unscrew the fasteners and remove the handle

What are Euro pens

Factory door handles for the VAZ 2114 are not particularly convenient or beautiful in design. Euro pens are an excellent replacement for them. They are called that because the idea of design and operating principle was taken from Western automakers. Such handles have long been used on many cars of European brands.

Opening the door with their help is very simple; you do not need to press the lever under the handle, as with the factory solution. To open, just pull the handle itself and the mechanism will work, after which it will return to its original position.

This principle of operation allows the Euro pens 2114 to look quite attractive and minimalistic. They do not have any protruding elements, buttons that need to be pressed or levers that need to be pulled. The lock cylinder is installed in the handle (in VAZ 2114 euro handles for front doors) and that’s it, the rest of the mechanism is hidden and cannot be detected at first glance.

Useful video

You can glean additional useful information from the video below:

High-quality and correctly installed European VAZ 2114 handles will delight you with their appearance and convenience for a long time. Together with them, you can install silent locks for full approximation to Euro doors.

Many modern car enthusiasts are trying to tune their car. The owners of the VAZ-2114 were also no exception, and often one of the types of modifications is the installation of European-style handles. Of course, at first the process itself may seem complicated, but there is no easier tuning than this.

Video about installing Euro handles on a VAZ-2114 below:

The video will tell you how you can easily install European-style handles on a domestic VAZ-2114

How to check the quality of Euro handles on a VAZ 2114

Before purchasing any euro handles, you need to make sure of the quality of their performance; after all, they must provide uninterrupted access to the car under any conditions. It will be a shame not to get into the car in the cold because of low-quality handles, for which you also paid extra.

In order to be confident in the quality of the purchased components for your car, you need to:

Buy spare parts in good, trusted stores and do not pay for the product before you have looked at it. For example, in your city you may not have exactly the Euro pens you wanted or your color. You will have to order them online, then it is better to look at the reviews of those who have already bought there or ask for delivery by courier to check everything before making payment.
Look at the packaging; the manufacturer will not pack a quality product in poor packaging. In addition, it must have markings, certificate marks, and so on. The kit must include detailed, complete instructions and a warranty card.
Appearance is also very important; various defects indicate the irresponsible approach of the manufacturer, if he allows this in the appearance of his product, what can be said about the reliability that he has built into the handle mechanism.

After you have chosen and purchased a kit in which you are completely confident, you can go to a car service center. Installing Euro handles on a VAZ 2114 is a fairly inexpensive procedure and many service stations often carry it out, so they will not have any problems with it.

But you can do everything yourself.

Installing euro handles on a VAZ 2114

Euro pens “LYNX” to match the body color cost 1,500 rubles. Plus installation 1500 rub. 1 year warranty. All popular colors are available.

Installing Euro handles on a VAZ 2114 takes 40 minutes. When installed correctly, these handles will serve you for quite a long time. Silent locks with handles installed will cost 500 rubles. all doors. Adjustment of doors, alarms (locking and unlocking) - free of charge. In addition to eliminating sagging and opening a jammed door. When installing euro handles, the smooth opening of the door without any problems is taken into account, the soft closing of the door, the precise operation of locking and unlocking from the key and from the alarm key fob, both the front and rear doors of your car, are also taken into account. When installing euro handles, if the car is not new, It may be necessary to change some spare parts in order for the door to work properly, such spare parts as external locks (chocolate bars), internal mechanisms, alarm motors. We have all spare parts for doors in stock.

Elimination of door sag from 200 rubles.

You can sign up for installation by phone. 89372817000. auto repair shop Br-Gavs

The video shows the TuneAuto handles, they are slightly different from the Lynx, they have three attachment points, and only one driver handle has a hole for the lock cylinder. The hole for the lock cylinder is always oval. If you insert a cylinder with a key into this hole and twist the key, it will rotate very tightly, since the hole in the handle itself is oval)), but if installed correctly they last quite a long time, they should be installed on 1-3 year old cars, since these handles have weaker design; when installing the TuneAuto euro handles, it is often necessary to replace some tired external locks (chocolate bars) with new ones to make it easier to open the door; in principle, such replacements of “chocolate bars” often occur when installing the Lynx euro handles, because with any installation of euro handles the quality of the installation also depends on the locks and mechanisms on this car; if the locks or internal mechanisms are worn out, this often happens with the driver’s door, because it “suffers” the most - it is used, you will have to replace one or another mechanism so that this door no longer bothers you.

The video shows how the handle works, when opened it returns back to its place, there are zero gaps, it works clearly, this is how the TuneAuto euro handles should open the door, by and large the Lynx euro handles open the door just as clearly, returning after opening to its place, with proper installation.

This video shows how to install the Euro handle “LYNX” in the door.

The following video shows how the Euro handles “LYNX” are opened

silent locks in combination with euro handles

Step-by-step instructions for replacing the outer and inner door handles on a VAZ 2114

The elements that open and close the door structures on your car wear out over time. Replacing the VAZ 2114 door handle from the inside or outside may be required due to abrasions, scratches, and deformation. The procedure for removing and installing a new part is different for the rear and front doors, so separate instructions are provided for each situation.

The process of replacing the internal door handle on a VAZ-2114

One of the simplest operations is replacing the door handle from the inside. So, motorists often figure out what needs to be done.

Broken interior door handle.

But, nevertheless, we will describe the complete technical replacement process:

By prying and pulling with a screwdriver, we remove the door handle trim.

We remove all elements including the handle trim.

We remove the door card.

Disconnect the drive rods from the handle.

Causes of malfunction

Before replacing a part, you should find out the cause of the failure. The main ones:

damage after an accident;
mechanical damage to internal elements;
Hacking attempt;
failure of the external door opening manipulator;
pressing hard on the handle.

Most often, the plastic part breaks or breaks as a result of constant opening.

Replacing the inner handle

If the internal door handle of a VAZ 2114 is broken, then cosmetic repairs are impossible. To repair, you will need a standard set of tools: several types of screwdrivers, a sharp knife and a 8mm wrench. It is better to change the part while in the salon. Algorithm for replacing a part:

The lining is removed. It is pryed off with the thin end of a screwdriver. It is important to remove all fragments of decor.
The door card is being dismantled.
The rod is disconnected.
To remove the remains of the broken opening device, the fasteners are unscrewed.
A new element is installed. It should be attached to the rod, and then the facing elements should be reassembled.

The trim on the VAZ is fixed with special clips. To remove them, you can pry up the edge with a screwdriver. Proceed with caution as they are plastic and may break. This is affected by rough handling, material wear or cold.

Replacing the external handles of a VAZ 2114

VAZ-2114 owners have repeatedly faced the problem of replacing a door handle. This process is quite simple, but people often get confused with it and, out of ignorance, damage the element itself or a neighboring one. The article will tell you how to replace a door handle from the outside without much effort.

Video about replacing the inside rear door handle (carefully mat):

The video will tell you about the features of replacing a door handle on a VAZ-2114, and will also tell you about the main subtleties and nuances of the process.

Replacing the outside door handle

Replacing the inner door handle of a VAZ 2114 is not as difficult as dismantling the outer element. First you need to determine the fastening method, which is specified in the technical document for the car. It will not be possible to get to the fasteners without removing the casing. Armed with screwdrivers and a 8mm wrench, it is important to follow the step-by-step instructions:

Remove trim.
Remove the thrust rods from the closing mechanism.
Unscrew the external fastening screw.
Remove the rubber seals and remove the handle.
Inspect and clean the installation site of the new structure.

Assembly is carried out in reverse order.

The process of replacing the internal door handle on a VAZ-2114

One of the simplest operations is replacing the door handle from the inside. So, motorists often figure out what needs to be done.

Broken interior door handle.

But, nevertheless, we will describe the complete technical replacement process:

By prying and pulling with a screwdriver, we remove the door handle trim.

We remove all elements including the handle trim.

We remove the door card.

Disconnect the drive rods from the handle.

We install a new handle and attach the rods.

Exterior door handle replacement process

Based on this, one can logically guess that in order to remove the outer door handle, it is necessary to dismantle the door trim. Next, the process will follow the same pattern:

When the casing is dismantled, remove the thrust rods from the handle lock.

Remove the door handle thrust rods from the frame

Unscrew the screws securing the rods

Unscrew the fasteners and remove the handle

Handle selection

Repair will require a new part. The mechanism is sold for the driver's or passenger's door. When purchasing, you should pay attention to:

Appearance of the product. Experts recommend taking a closer look at Euro pens.
Manufacturer.
Material of manufacture. The standard version is made of plastic, but there may be products with additional elements. Some manufacturers add chrome strips.

It is better to purchase AvtoVAZ products. Factory articles: 2109-6105180 – for internal, 2108-6105177 – for external product.

How to remove the door handle of a VAZ 2109, 2114.

So, we'll start by removing the door card. To do this, unscrew the pin that closes the door from the inside. Next, we take out the plugs from the door handle and unscrew the bolts that secure the handle.

Now, perhaps, the most difficult thing that will have to be done, and at this stage many people have a question about how to remove the window lifter handle of the VAZ 2109, 2114. To do this, take a thin, narrow minus screwdriver. We insert it between the latch and the washer and carefully press out the jammed handle latch. Next, pull it towards you and take it out completely.

I hope the photo makes everything clearer.

We unscrew the bolts securing the door card from the bottom (if you have a VAZ 2114 with electric windows, then unhook the pads from the window buttons) and take out the rubber seal from the top. Remove the decorative trim of the interior door handle by prying it off with a screwdriver or knife. Now nothing prevents us from removing the door trim and pulling it out from the bedbugs.

We pull out the rods coming from the handle lock and from the handle itself. It is more convenient to do this by grasping the plastic part of the rod with pliers. Or you can try to pry them off with a screwdriver.

The handle is held on by two nuts. We unscrew them and pull out the handle.

How to insert the cylinder into the euro handle of a VAZ 2109, 2114.

In order to insert the old lock cylinder into the Euro handle of the VAZ 2109, you first need to remove it from the old one. To do this, use a thin screwdriver to press the stopper (if it does not press on one side, try it on the other).

We pull out the stopper with pliers.

We insert the key into the lock and use a screwdriver to remove the spring from the inside of the handle. The larva is pulled out and thoroughly wiped.

We take out the sealing ring from the set with the euro handle and pull it onto the cylinder.

Take lithol and lightly coat the larva. After which, the larva is inserted into a new handle.

We install the spring on the lock cylinder. We install the lock release rod on the cylinder and insert the stopper. Lubricate all rubbing parts.

Now you know how to insert the cylinder into the euro handle of the VAZ 2109, 2114 and the handle is ready for installation.

How to install euro handles on a VAZ 2109, 2114.

To install the Euro handle on a VAZ 2109, 2114, we squeeze it out and try to insert it into the socket. The fit is a little tight. After installing the handle in the technological hole, you need to push it a little in the direction of travel of the car and the handle completely sits in place. Now you can screw it on

Door opening rods are included with the Euro handles. Two short ones go to the rear doors, two long ones to the front ones. We put on the required rod and adjust it by unscrewing or screwing the plastic attachment onto the rod. We try to open and close the door. If the door does not open, then unscrew the plastic cap a few turns; if the door does not close, then tighten it.

All! Euro pen installed! Now all that remains is to assemble the door card. It is assembled in the reverse order of disassembly.

How to install Euro handles on a VAZ 2109, 2114 is no longer a secret for you!

The second stage is assembly!

Before installing the Euro handle in the VAZ 2115 door, you need to remove the lock along with the cylinder from the old handle. To do this, remove the rod that is attached to the cylinder, then carefully remove the retaining ring of the cylinder along with the spring. We install the key in the keyhole and pull it towards ourselves along with the cylinder.
We clean and lubricate the mechanism, as well as all rods and connections, after which we install the rubber gasket that comes with the Euro handle and begin assembly.

Before final assembly, we check how the handle and lock work, making sure that everything is assembled correctly and works as it should.
We attach the handle to the bolts and assemble everything in the reverse order.

As you can see, installing Euro handles on a “tag” is a fairly simple task that any “home” craftsman can do. By installing Euro handles “Lynx” on a VAZ 2115, they can improve the appearance of the car and also make opening doors more pleasant.

For clarity, I recommend that you watch a video on how to install Euro handles “Lynx” on a VAZ 2115

#1 AAIvanov

New
2 messages
Car make: VAZ 2114
From: St. Petersburg