Options for modifications and tuning of Lada Largus

Do-it-yourself Largus Cross tuning

Modernization of the model is mostly aimed at increasing the level of comfort, reducing fuel consumption, increasing dynamics, and improving appearance.

Engine

One of the options for tuning the car in question is to improve the power unit, which is capable of developing from 102 to 106 hp. depending on the settings and features of the motor. For a measured ride, these characteristics are quite enough. However, there are car enthusiasts for whom the standard power is not enough. You can modify the engine in the following ways:

• perform chip tuning by flashing the electronic control unit;
• change characteristics by replacing engine parts.

Chipovka

The most popular option for upgrading a power plant is chip tuning. If the work is carried out in a specialized service, where the unit is flashed with a program with properly calibrated parameters, then you can get greater dynamics from the car. Depending on your wishes, the electronic unit can be re-flashed to suit your needs:

• reduction in fuel consumption;
• reduction of exhaust toxicity;
• improvement of dynamic performance.

Reprogramming the unit yourself is not recommended, as there is a high probability of side effects. High-quality work costs about 4–10 thousand rubles. As a result of its implementation, it is possible to improve the elasticity of the engine and reduce consumption by 1.5 liters per 100 km. If the results of chipping seem insufficient to you, then you need to engage in more global modernization.

Technical improvement

Intervention in the design of the motor can improve the initial power characteristics by 10–40%. Refinement involves intervention in the following nodes:

• supply system;
• gas distribution mechanism;
• injection elements;
• cylinder-piston group.

Chassis

If the owner of the Largus Cross is not satisfied with the characteristics of the suspension, changes can be made to it. Through modifications you can improve the driving performance of the car. Changes can be aimed at the following actions:

• installation of reinforced suspension elements;
• increase or decrease in clearance;
• installation of parts with improved characteristics (stands, stabilizers, etc.).

The clearance of the Largus Cross is 170–195 mm, depending on the configuration. These indicators are quite enough for confident driving both in the city, on the highway, and for trips into nature. If the ground clearance seems too low, it can be increased by installing special spacers for the shock absorbers. These parts are mounted between the cup and the racks.

There is also a more complex and expensive option for increasing ground clearance: replacing shock absorbers and springs or installing larger wheels. As for reducing the ground clearance, in relation to the Largus Cross this procedure is simply inappropriate, unless the goal is to make the car an exhibition piece.

Video: increasing ground clearance using the example of Logan

Brake system

Tuning the brake system involves installing larger brake discs or products with perforations and notches. Thus, it is possible to increase the efficiency of the brakes and improve the removal of heat and moisture from the working surface. When choosing brake discs, you should focus on the standard size of 260 mm.

In addition to original wheels from Renault-AvtoVAZ, you can install products from the following manufacturers:

Appearance

The owners put a lot of effort into changing the appearance of the Largus Cross. Let's look at the main elements that can be modified:

• front and rear bumper. If desired, the car can be given a more sporty and dynamic look by installing tuned bumpers;
• thresholds. Installing thresholds improves the appearance of the car, the landing is visually lowered and when installing the box on the roof, it is easier to use;

There are actually quite a few options for external tuning. For example, you can repaint the car, do airbrushing, tint the windows, etc. If the financial side of the issue is not decisive, then modifications can be made endlessly. However, the Largus Cross is far from the most suitable car for these purposes.

Optics modernization

The standard headlights cause a lot of criticism. Despite the changes made by the designers, the optics still do not differ in originality from other VAZ models. Owners of Largus cars can improve the optics by installing lensed headlights. Compared to stock, this lighting makes the car attractive and improves safety when driving at night. Both xenon and bi-xenon can be installed in the headlights. The second option is a lamp with built-in low and high beam.

Standard headlights can also be equipped with angel eyes, which are a fairly popular tuning element today. In addition, the attractiveness of the fog lights can be improved. To do this, install a frame with chrome elements or with daytime running lights.

The taillights are also not deprived of attention. Today, various tuning options are offered that will not only change the appearance of the Largus, but will also add originality and increase safety, which is possible thanks to LED elements. This is due to the fact that the dimensions and brake lights made of LEDs are clearly visible in the dark, during the day and in bad weather.

Salon

Since the driver and passengers spend most of the time inside the car, a lot of modifications are also made to the interior decoration. Interior tuning involves solving one or more problems:

• improved comfort;
• expansion of functionality;
• improvements according to the personal preferences of the owner.

Specific actions directly depend on the goals set and the budget allocated for interior modernization.

Tidy improvements

If you listen to the opinion of many car owners, the standard instrument cluster is not very informative. To make this element more readable, you can install a digital instrument panel that is compatible with the standard wiring. If you do not want to completely change the instrument panel, you can replace the backlight lamps and controls to your liking. Thus, the lighting will not distract from the road during long night trips.

Interior and trunk lighting

Improvements to the lighting in the cabin can begin with the lampshade, since this element does not provide sufficient brightness of the backlight. Modernization comes down to replacing standard W5W light bulbs with LED ones. If the brightness is still not enough, install additional LED boards directly into the lampshade, connecting them parallel to the standard lamp and fixing them with double-sided tape. For better light diffusion, you can use foil, which is glued to the inner surface of the lampshade.

In addition to the interior, the lack of lighting in the Largus is observed in the luggage compartment, which is especially inconvenient in the dark. As additional light sources, you can use LED strips or lamps that are placed on the ceiling and connected to the trunk light connector. Additionally, you can organize illumination of the driver’s and passengers’ feet, as well as the thresholds when the door is open. For these purposes, LED strip or special lampshades are also used, which are connected to the door ends. Such modifications will provide the interior with a sufficient level of illumination.

Heating and ventilation

For Russian winters, it would be a good idea to equip the car seats with heating. When installing such equipment, you should use products from trusted manufacturers to avoid accidental fire. It is recommended to purchase kits specifically for Largus and install them in specialized services if you are not confident in your own abilities. In addition to heating, the ventilation system on the car in question should be improved. Despite the presence of air conditioning, there is simply no cabin filter from the factory. With simple steps, the filter element can be installed in its regular place using a screwdriver and a utility knife.

Video: installing a cabin filter on Largus

Noise insulation

On the Lada Largus Cross, sound insulation from the factory is present, but in a minimal amount, which does not provide a decent level of silence in the cabin. To increase comfort and reduce extraneous noise, the interior is completely soundproofed. To do this, the interior is completely disassembled, the body is cleaned of possible contaminants and dried. After this, the roof, pillars, floor, engine shield and doors are covered with a layer of vibration and sound insulation materials.

Interior styling

Modification of the interior depends only on the imagination and finances of the owner. Low-cost methods include installing seat covers, steering wheel covers and gear levers.

Additionally, you can cover the torpedo with carbon film. For more serious changes, you can replace the standard seats with sports ones. However, this option would not be entirely appropriate, since the car was initially designed for measured driving. Comprehensive tuning of the Largus interior involves complete reupholstery with the selected material. One of the additional elements that the owners of the model in question install is the armrest between the front seats. A wide variety allows you to choose a product of a suitable design and the necessary fastening.

Tuning doors and trunk

The doors on the Largus can also be modified if desired. First of all, attention is paid to the additional seal that is applied to the doorway or the door itself. Thus, the doors will close more quietly, less noise and dust will penetrate into the interior, and in winter it will be warmer inside. Doors can also be equipped with glass closers. This device provides:

• opening and closing the glass with one touch of a button;
• closing the windows when arming the car;
• raising the windows when closing the doors using the central locking remote control.

You can install a subwoofer in the trunk, thereby improving the sound of music in the cabin. However, if the machine is used to transport goods, then installing such a device may cause some inconvenience. Therefore, before introducing a subwoofer, you should think about its placement and design.

Interior improvement

The interior of Lada Largus cars meets the minimum comfort requirements. The owners of this vehicle offered several options for modifying the interior, some of which were introduced into mass production by the AvtoVAZ concern. Here are the most interesting:

• Introduction of LED illumination of the ignition switch;
• Modification of the stove and installation of new deflectors;
• Installation of LED trunk lighting unit;
• Pasting sound and vibration insulation of the interior;
• Replacement of front and rear seats;
• Optional: installation of a glove box, ashtray, organizer, sun visor.

Other interesting options: installing a new dashboard, phone holder, DVR, remote tachometer, new steering wheel, gear knob, seat ventilation, radio, speakers, cup holders. Taking into account the affordable price tag of VAZ spare parts, many interior modifications will be available even to car enthusiasts on a limited budget.

Improving the motor

When considering such a car improvement as tuning the Lada Largus model, it is initially recommended to look towards the technical characteristics. The motor should receive special attention. The power of the unit varies from 84 hp. With. up to 102 “horses”, depending on the design features of the block heads and unit settings. This is enough for family owners for everyday driving. However, among the owners of Lada Largus there are many who are not entirely satisfied with the standard engine capabilities. There are quite a lot of reviews online about the poor dynamics of this car. The existing shortcoming can be leveled out if you are thinking about tuning the engine.

Here the owner has two options available to him:

• perform chip tuning of the electronic control module, after which the settings will change;
• modify the unit mechanically, which implies constructive intervention in order to replace components with reinforced analogues.

Here we will dwell in more detail on both options for modifying the Lada Largus Cross unit. Let's start with the chip.

Blown engine head gasket

The thing is that the motor is not a monolithic structure; it has a block head and the block itself. They are connected through a special gasket. If this gasket is broken (and this happens, for example, due to poor broaching), then the coolant will go into the cylinders or the muffler ( white thick smoke will come out ). Thus, there will not be enough coolant in the system (possible air pockets) and therefore the stove will heat poorly! It is urgent to change the head gasket, otherwise you can kill the engine through overheating.

These are probably all the main reasons when the stove does not heat well! On a personal note, I would like to note that in most cases this is a thermostat malfunction (about 70%). So the first thing to check is to change it.

Now let’s watch a short useful video.

And that’s all, read our AUTOBLOG.

( 27 votes, average: 4.00 out of 5)

Chip tuning of Lada Largus car

This practice is quite common and most owners use it successfully. The essence of the transformation is as follows: by changing the settings of the electronic unit, we achieve adjustments to the characteristics of the motor. With proper calibration of certain parameters, you can get a very decent result, after which the car will drive noticeably more vigorously.

Chip tuning is performed by specialized workshops. They reprogram the standard firmware version to another one. Depending on the needs of the owner, you can install a program that will provide the motor with a specific set of modified characteristics. So using the firmware you can achieve the following results:

• reducing fuel consumption;
• reduction of exhaust toxicity;
• increasing acceleration dynamics.

Carrying out this procedure with your own hands is undesirable even for an experienced owner, since it can lead to a lot of side effects. Here you should entrust your car to professionals. If the modification is carried out efficiently, then the owner will say goodbye to a sum of approximately 4-10 thousand rubles, which is not a catastrophic waste.

As a result of chipping, the characteristics of the motor change, however, by an insignificant amount.

No need to get too carried away

Let's look at what the technical characteristics of the Lada Largus van look like:

• Load capacity – 725 kg;
• The permissible cargo weight is 1325-1350 kg, depending on the configuration.

The last numbers are for the case when the car is not moving anywhere. That is, it is better not to take them into account. Now let’s calculate the weight of the additional equipment:

• Plywood density is 0.7 tons per cubic meter. m., which means the flooring weighs 26 kg (sheet thickness - 1.5 cm);
• If you use isolon, then to get the weight in kilograms, multiply the liter volume by 0.2;
• The weight of steel with a thickness of 2.5 mm is 20 kg per square meter.

The presence of flooring will reduce the load capacity to 700 kg. But this is not the worst thing.

People often make mistakes not only with “extra weight”, but also with weight distribution. The left and right shock absorbers must be loaded equally. Branded furniture looks very beautiful. But when installing it, as a rule, no one takes into account the weight distribution.

Car furniture (steel sheet).

Mechanical conversions

If the owner is interested in global improvements to the unit, then he should resort to the mechanical upgrade option. Such a modification can significantly improve the characteristics, and this is a “plus” of 10-40% to the standard parameters.

This transformation is carried out by replacing some parts in the unit. As a rule, the following components are subject to modification:

• fuel supply system;
• elements of the gas distribution mechanism;
• injection components;
• parts of the cylinder-piston group and the block head.

Here we recommend taking into account an important aspect: components should be replaced only with analogues that are structurally compatible with this unit. Otherwise, there is a risk of motor damage.

Modernization of the body of the Largus model

We have seen that in some cases it is not difficult to transform the characteristics of a motor, although an infusion of a certain financial resource is required.

What should an owner do if he is “satisfied” with the modernized engine, but is not satisfied with the appearance of the body? Here the saving measure will be a transformation in the exterior of the Lada Largus.

In this case, you can also lean towards two courses of action:

• perform structural transformation of body components;
• so-called cosmetic modification.

The first option involves replacing some body elements with new products, usually of an individual design. Note that a well-executed modification of this nature can not only significantly transform the exterior of the car, giving it speed and sportiness, but also significantly improve aerodynamic performance.

The most common structural modifications that most owners of Lada Largus Cross are inclined towards are the following:

• spoiler installation;
• installation of body kit on the hood (linings, buckets, intakes, etc.);
• replacing head and rear optics with more advanced and powerful lighting designs;
• the use of reinforcing components around the perimeter of the body (front grille, protective linings, skirts, etc.);
• installation of new wheels complete with tires instead of standard products;
• replacement of bumpers, exterior mirrors, etc.

Naturally, such transformations cost a lot of money and require the allocation of significant time resources.

A simpler version of the transformation will be cosmetic tuning. It involves the implementation of activities in the following areas:

• updating the paintwork of the body;
• tinting of glass, as well as optical devices;
• airbrushed designs on body panels;
• wrapping the body with various polymer materials (carbon films, vinyl, etc.);
• use of additional LED lighting sources.

Such events can provide the Lada Largus Cross with an updated look, allowing it to stand out in the gray mass of traffic. The main advantage of this method is its low cost.

How to do tuning Lada Largus Cross with your own hands

So, you have purchased a brand new (or maybe even used) Lada Largus car. You like absolutely everything and can’t wait to start using your purchase. However, you have the power to turn an ordinary car into a real miracle on the road.

Restyling is a change in the appearance (interior and exterior) and internal content of a car in order to improve its characteristics during operation. Rest assured that almost every Russian is capable of upgrading the engine of a domestic car.

About other modernization methods

In addition to the engine and body, the Lada Largus also has a sufficient number of components to which the owner can “offer” improvements.

Depending only on his own needs and preferences, the owner of a Russian station wagon can perform the following transformations:

• in the cabin, changing the appearance of panels and interior components;
• in a multimedia complex by installing more powerful speaker systems or a head unit;
• in the suspension due to the use of reinforced elements.

Headlining

Often the cargo compartments of Lada Largus are converted into isothermal vans with refrigeration equipment. In this case, or when the transportation of goods poses a threat of damage to the inner surface of the roof, Lada Largus cannot do without ceiling lining. The Largus roof cladding from the inside can be made of all types of plywood (laminated or lightweight birch), new generation composite material, plastic, “Quintet” aluminum. If you are converting a Lada Largus cargo van into an isothermal van, then before installing the protective kit, the ceiling, as well as all internal surfaces of the cargo compartment, must be thermally insulated.

Along with cargo compartment protection, our customers also order a reliable and spacious Lada Largus roof rack, made of high-quality steel.

Largus interior tuning

Interior tuning here has the goal of the event, which comes down to improving the interior not only from an aesthetic, but also from a functional perspective. The following areas of activity are available to each owner:

• replacing covers with more modern models or installing new seats instead of standard seats;
• covering interior panels with new materials (leather, Alcantara, etc.);
• replacing the steering wheel with a sports-style analogue is also a kind of tuning of the interior;
• installation of more aesthetic regulators, switches, overlays, lighting sources, including additional ones (for example, for legs);
• armrest installation;
• replacing door handles with analogues and installing backlighting;
• soundproofing of the cabin space.

Such interior tuning should be done carefully and slowly, which will allow, upon completion of all manipulations, to acquire a stylish and beautiful interior, also made with high quality.

Stove deflector “warm feet”

After the problem became widespread (not only Lada Largus owners face it, but also Renault Sandero, Logan, Duster, built on the B0 platform), the “Heater deflector warm feet” accessory appeared on the market. This is a piece of plastic that should be installed on the standard air duct and secured with the M6 ​​nut that comes with the kit (instead of the standard one).

It is worth noting that this deflector is only suitable for cars up to 2020, where the air outlet is narrow and elongated. The price of the accessory is about 160 rubles.

Have you encountered a similar problem? What is the best way to proceed in this case?

Let us remind you that you can make your car even warmer by installing additional door seals on Largus.

As you know, the radiator takes over control of the proper temperature in the Lada Largus, as in other cars. Working closely with it is a complex system of mechanical and electrical components involved in heating the driver and his passengers. Among them are the Lada Largus “Warm Feet” stove deflector, a chisel fan, and a steel casing.

The heater radiator in a car performs the same function as an apartment battery, it heats the space (interior)

More about multimedia

This is another stage included in interior tuning. It involves replacing standard multimedia elements with more advanced and functional audio components. All work can be done with your own hands.

Transformations of this nature are subject to:

• head units;
• speakers (both replacement and installation of additional speakers);
• connecting and installing a subwoofer;
• TV installation.

Here, when performing tuning, it is possible to interfere with the design of some standard elements of the body and interior, which will have to be taken into account in advance and prepared for. We continue to study all the innovations for the popular Largus model.

Door trim Largus

Lada Largus with a van-type body has solid rear and rear-side van panels. During development, we took into account the possibility of fully covering the Lada Largus doors - rear and side. Protective panels are installed on the tailgate of the Lada Largus without interfering with the design of the all-metal van. They can be easily removed if necessary.

Door protection is included in any of the kits, but you can buy Lada Largus door trim separately using our configurator.

Improving the suspension

This direction of modernization can also improve the driving performance of the car. Here, options for action can relate to a variety of goals. Here are some of them:

• the use of reinforced chassis components in order to increase their service life;
• increased ground clearance;
• decreased clearance;
• installation of parts with improved characteristics (shock absorbers, stabilizer, etc.).

This type of modernization is also quite expensive, so this factor should be taken into account before the implementation of the event begins.

Increased ground clearance

This is what Largus looks like after increasing the ground clearance

Some car enthusiasts, especially those who love tuning, on the contrary, try to reduce the ground clearance, but those who use the car every day, on the contrary, are increasingly trying to increase the landing of the car.

To increase ground clearance on Largus, it is necessary to make several modifications, which can be combined or applied separately:

• Replacing wheels with a larger radius.
• Installing stands under the racks.
• Replacement of parts with longer and reinforced ones.

All these issues need to be considered in more detail.

Replacing tires and wheels

And this is the 16th radius

This is already a low profile, but wide disk

The most common size for increasing ground clearance is 205/65 R15, suitable for standard Largus rims

Changing the wheel radius can affect the increase in ground clearance . But every plus has minuses.

Thus, an increase in the radius of the wheel can lead to deterioration and inaccuracy in the readings of speed instruments, as well as to failure of the speed sensors and ABS.

Spacers for racks

This is what spacers look like on a Lada Largus

The best option is to install a stand under the shock absorber struts of the Lada Largus. They are sold separately and most are universal. They are installed between the body and the spring, sliding onto the shock absorber rod.

Spacer from Priora for Largus rear strut

This method has no disadvantages and is considered optimal for increasing the vehicle’s ground clearance.

25 cm ground clearance - pretty good

Replacement of spare parts

Another way to increase the ground clearance of Largus is the installation of higher shock-absorbing struts, which are produced by. They are 2 cm longer, which increases ground clearance. This modification also has no consequences, so it can be safely used on a car. The only negative is the price of the part, which is twice as high as the original spare part.

Let's sum it up

Lada Largus Cross is a model that allows its owners to perform a wide variety of tuning and introduce all innovations to an unlimited extent. At the same time, you can do almost everything with your own hands. Here the main factor may be the financial component, which often determines in which direction tuning should be developed in a particular case. If this aspect does not concern the owner who is prone to transformation, then desires and preferences come to the fore.

The result of tuning the Lada Largus Cross will be not only a satisfied owner, but also a significantly transformed car; all innovations are the path to individuality, which is so rare in our time.

Auto VAZ cars are excellent representatives of road transport that behave with dignity on the roads. These cars cannot be called unfinished, since the build quality and materials used are at a high level, which also applies to the Lada Largus.

Lada Largus is a wonderful car that can become an ideal family friend without any modifications. This domestic brand has a foreign analogue - Dacia Logan MCV. There are 3 versions of this car: a passenger station wagon, a station wagon with increased capacity and a cargo van. Among passenger cars, there are models designed for both 5 and 7 seats. Even without tuning, the car copes with its functional responsibilities perfectly.

In 2013, the modernized Lada Largus entered the automobile market from the Auto VAZ assembly line, but it did not cause a storm of applause, since the changes were insignificant. It featured new alloy wheels, and some interior details were added.

Car owners try to improve their “iron friend” on their own, spending a lot of time tuning it, trying not only to improve the design and driving characteristics, but also to uniqueize the appearance. With ingenuity, skillful hands and a lot of free time, you can make a dream car out of a Lada Largus, transforming both the external appearance and the interior design.

Having skills in tuning and knowledge of the car’s features, you can save a lot on the modification process, since there is no need to contact a car repair shop.

The main task of tuning the Lada Largus should be aimed at ensuring stable driving dynamics of the car, fuel economy, and also improving ergonomics. As a result, the patient master will receive a bonus in the form of the luxurious appearance of his “steel” friend.

Installing Ferrum heater handles

The Ferrum company specializes in the sale of tuning accessories for cars of various brands, including Lada. At first, their product catalog included stylish heater handles, but only for Priora and Granta. But this did not stop the owners of Largus; they modified the fastening of handles from Priora to fit their car.

Currently, the handles of the GF-141 heater control unit are specially designed for Lada Largus. You can choose from chrome, silver or black accessories. How to replace heater knobs? Very simple! Place the handles with the LEDs facing up and pry them off with a screwdriver or knife. Place the new handles in their place until they click. The replacement process is shown in the video:

Products from Ferrum Group can be purchased in our online store.

Interior trim of Lada Largus

The easiest way to start improving your car is with the interior trim. The first thing you should pay attention to is the installation of armrests, since they are an integral element of the cabin. Thanks to them, the salon will acquire a stylish appearance. In addition, the direct task of the armrests is to give your arms a chance to rest during a long journey. The armrest most often takes the form of a small box installed between the two front seats.

Lada Largus - front panel

Another original and very useful solution would be to install a backlight for the handle. In the dark, it will be very useful, especially for those who are in your car for the first time.

To completely improve your salon, you need to spend a small amount on items such as:

• microswitches;
• 4 LEDs;
• connectors and adapters;
• 4 resistors with a resistance of 510 Ohms.

Problems with operating the Lada Largus stove

It is a well-known fact that the front panel on the Lada Largus car is borrowed from Renault Logan. Taking this into account, their interior heating systems are similar. However, the volume of the seven-seater body of the domestic vehicle is significantly larger than that of the “French”.

Dimensional discrepancy

In winter, passengers may experience some inconvenience due to this difference, which is associated with the size and lack of heat in the cabin. Even for the driver, when moving the dampers of the heating device, the flow of warm air will not be enough to comfortably drive the car.

In view of this, during the first winter of operation, drivers try to eliminate inaccuracies in the design activities of designers. Most often, modifications to the Largus stove involve closing the far holes of the nozzle that supplies air to the feet of passengers. This leads to a redistribution of the directed heat, increasing its quantity.

Engine idling

At the same time, problems with the functioning of the stove are often associated with a sharp decrease in warm air at the moment when the engine is idling. This can create certain inconveniences, especially when driving within the city, in traffic jams. The main reason for this is a decrease in the temperature of the antifreeze in the engine cooling system.

To prevent this, you should insulate the compartment where the engine is located by installing special coatings on the hood. In addition, you can use different ways to close the radiator grille.

Tuning work for the Lada Largus interior

Installation of lighting for the handle. This process takes place in several stages, so each action must be performed carefully and thoughtfully, since careless movement can lead to damage to the item. First of all, you need to remove the seat trim. Next, the preparatory work begins: unscrew the screws located under the plastic tabs and remove the clips, after which you need to disassemble the handle. To attach an LED, you need to drill several holes on the moving part of the object, and they must be at a certain angle. Pass the wires pre-connected to the LED through the holes.

The installation stage is over, let's move on to connecting the connectors and the actual assembly. A wire with a positive charge must be passed through a resistor (as a result, the current value should be within 20 mA). To ensure that the structure holds tightly, it is better to use a sealant. The next step is based on connecting the switch. This stage is the most responsible. In order for it to work stably and uninterruptedly, it should be attached next to the lock rod and attach the wire: one end goes to the microswitch, and the other to the lock rod. The free part of the wire should be wrapped with insulating tape.

Thus, the principle of operation of the switch is based on the operation of the headlights and dimensions. When the lock is closed, the backlight will turn off.

In addition to the transformations discussed, you can change almost all the details of the interior; it all depends on creativity, patience, perseverance, as well as the available budget. For example, you can install new door panels made from higher quality materials. To improve sound insulation, it would be an excellent solution to use vibration-absorbing materials. The dashboard can also be upgraded by replacing it with a new and more functional one. Various types of lighting will make your car unique and inimitable.

Lada Largus - front view

Tuning Lada Largus

Basic tuning of the Lada Largus is, in many ways, a mandatory procedure that should not be neglected by any owner of this car. It can be compared to installing high-quality mirrors on a motorcycle instead of the basic ones that came from the factory. Indeed, in fact, externally, such mirrors are practically no different, but in practice it turns out that by replacing the mirrors on your motorcycle with mirrors from another manufacturer that specializes in this industry, a person increases the safety of his movement, since he can see the picture on the road in a comprehensive manner .

If you, in addition to the Lada Largus, also own a motorcycle, then be sure to check out https://r5.ru/zapchasti-dlya-motociklov, there you will find mirrors for your motorcycle, which will allow you to move safer on the roads.

But let’s return to the main topic of this article – tuning the Lada Largus. As part of this publication, we want to tell you about the basic modifications to your car that every Lada Largus owner should think about. We will also give the average prices for these modifications, which were kindly provided to us by several automobile workshops from different regions of the country.

Replacing the armrest of Lada Largus

Replacing the base armrest of the Lada Largus will allow you to increase the comfort of being in the car, which is without a doubt a huge plus. And such a replacement is not expensive at all - about 1000 rubles.

Installing a locker on Lada Largus

Unfortunately, the roads in our country leave much to be desired and therefore you should not skimp on protecting your car from roughness and pollution. As a basic protection for wheel arches, you should use a car locker, which is very effective, but at the same time, its installation will cost relatively inexpensively - about 2,200 rubles.

Installing a tray in the trunk

If you often carry dirty things in the trunk of your car, then you should definitely think about installing a special trunk tray. The thing is that it can be easily dismantled, which means it will be easier for you to keep your trunk clean and less likely to have to go to a professional car wash to clean it. The cost of installing a tray in a Lada Largus will cost you about 700 rubles.

Replacing floor mats in the Lada Largus interior

Replacing the mats is a tuning of the Lada Largus, which it inherited from previous AvtoVAZ car models. The thing is that the basic mats are not a very well-thought-out size, which is why the interior quickly gets dirty. Updated mats will allow you to keep the interior of your car clean for a long time, which means you will have to clean the interior less often, which will allow you to save a lot. Replacing the floor mats in the Lada Largus will cost you about 2,400 rubles.

Installing hood gas struts

A gas strut is an indispensable item for those Lada Largus owners who are accustomed to carrying out a number of repairs on their own. The thing is that the work under the hood of the car in the Lada Largus is poorly thought out and only with the help of gas stops can they be made quite comfortable. The cost of installing gas struts on a Lada Largus, on average across the country, is 2,100 rubles.

Installing rear mudguards

Every car owner knows about the benefits of mud flaps, but for some reason AvtoVAZ designers don’t know or don’t want to know about them. Therefore, as soon as you have the opportunity, immediately carry out this tuning of the Lada Largus, since such a modification is not at all expensive - about 1000 rubles.

Installing a cabin filter on Lada Largus

The cabin air filter allows you to filter the air entering the car interior from dirt, dust and unpleasant odors. As a result, trips become more comfortable. Installing a cabin filter on a Lada Largus will cost you about 1,500 rubles.

Installing an automatic headlight system

Relatively recently, a law was introduced in Russia that obliges drivers to use low beams or special running lights during daylight hours. Since most drivers do not have the habit of doing this, car workshops have come up with a very original and practical solution - automatically turning on the low beam when the engine starts. Such modification of the Lada Largus will cost 2000 rubles, which is much cheaper than installing running lights on it, which are not provided for by the designers at all.

Tuning with “protection elements”

During a complete transformation of a car, it is worth thinking about its safety. Most often, the protection system concerns the rear and front bumpers. They are equipped with special elements made of stainless steel or polymer coated. These pads are used to prevent damage to the rear bumper from damage, for example when loading luggage through the rear doors. To protect the wheels from various stones and dust, wheel arch liners are used.

A rubber seal is installed on the rear doors of the car, which serves as a soundproofing element. To protect the radiator, you can install a special mesh (most often black or chrome is used), its cells allow air to pass through perfectly, and at the same time protect the radiator from various types of foreign bodies (stones, dust, insects).

Carbon film is an excellent element of protecting the body from minor scratches, which will also give a stylish look to your car. There is a huge selection of different colors and materials.

Lada Largus on the road

Thus, in order for your improved “steel” friend to serve you for a long time and reliably, tuning should be approached comprehensively. In any case, after tuning, the quality and appearance of the Lada Largus depend on the amount of money invested, as well as the skills and patience of the owner.

Floor covering in the cargo compartment of Lada Largus

The floor in Lada Largus can also be made from all the materials presented on the site, however, as experience shows, the most reliable and durable is considered to be a floor made from laminated moisture-resistant plywood 12 mm thick or a 1.5 mm “Quintet” aluminum sheet with a plywood backing 9 mm thick mm. Both plywood and aluminum for covering the Largus floor are taken with a special corrugated surface that provides an anti-slip effect.

You can order and buy the trunk trim for the Lada Largus right now. Go to the page of the corresponding model, select the necessary options in the configurator - select parts and materials, and the system itself will calculate the cost of the kit.

High-quality body cladding of the Lada Largus extends the life of the van for a long time and protects its internal surfaces from damage and corrosion.

Delivery of the kit throughout Russia is carried out by a transport company. You can also pick up your order yourself from Moscow and St. Petersburg. All manufactured protective cladding kits come with a 24 month warranty.