Connecting the radar detector to the ignition

The driver needs to download AntiRadar for Android for free on his phone to understand where radars and speed cameras are located, bus lane cameras that record traffic on the side of the road, and others.

Anti-Radar download free for Android and install on your phone is necessary in order to track the location of the car using GPS coordinates and receive information about radars and cameras around.

The database of such programs is updated daily, because tripods are installed manually and for several days, so it is important to always have the latest version.

The most popular AntiRadars for Android

We have selected the 5 most rated, and most importantly working programs with a large number of downloads and reviews. So:

You can download RadarDetector (GPS radar) from this link (APK file added at the end of the article). Distinctive features: the application supports smart watches and displays radar and camera locations in mobile ambushes, static ones, built into traffic lights. Also shows areas of bad roads and speed bumps.
You can download Radarbot: Radar detector and speedometer from the official store. It features an advanced speedometer, an always up-to-date road database, displays all passing objects via GPS in real time, sees tunnel radars, and shows problematic and dangerous sections of roads. Users actively communicate here and add more and more video recording points for violations.
You can officially download GPS AntiRadar (detector) FREE here. Really no ads, works in the background, i.e. you can use the Yandex Maps application and at the same time monitor information about cameras and radars, daily database updates for all of Russia.
You can download Smart Driver AntiRadar: traffic police and traffic police camera detector for free by going here. The main advantage, in addition to the standard set of modern radar detectors, is the built-in video recorder. Distinguishes speed cameras (for example, Strelka) from recording a violation of leaving the stop line. Shows stationary traffic police posts, thanks to active users, sees radars on tripods and mobile police vehicles.
And the final participant is the MapcamDroid radar detector, which you can download here.

Before you download AntiRadar for Android for free, you need to turn on the GPS sensor, because Without location detection, the application will not work.

If you don’t want to overpay for a physical device for your car, which, of course, is much more efficient, but in which you still need to update the database manually, then the easiest way is to download free Anti Radar for Android phone from the official Google Play store or APK installation file follow the links below.

The main advantages of using AntiRadar on Android:

the ability to use your personal phone without any expensive devices;
use another application at the same time, such as maps;
know which cameras will be ahead;
control your speed thanks to speed limit tips;
learn about bad roads and speed bumps;
The AntiRadar application on an Android phone can work without the Internet;
automatic daily database updates.

If you are tired of receiving fines for slightly exceeding the speed limit when overtaking a passing vehicle, then we recommend downloading the Arrow Radar Detector for Android for free, the full version on your phone and installing the application as default.

Download RadarDeketor APK 11 MB Download RadarBot APKAll AntiRadars on Google Play How to install APK

Version: 2020 (7.0.7) from 10/24/2019
Russian language: available
Developer: Various
Compatibility: Android4.0 and above
Category: Automobiles and Transport

Traffic rules application for Android Vezet Taxi application for Android Traffic police fines application for your phone

The situation on the roads sometimes resembles participation in some kind of computer game. You are given the goal of getting from point A to point B, while avoiding the traps of the patrol service, not falling into the radar field of view and not breaking any of the many rules. This task is not so simple, so we want to offer you a kind of cheat - special programs for Android that will warn you about posts, installed speed cameras and other troubles.

Speed Camera Alerts

The application is designed to notify you about radars waiting for you along the way, and it can do this with the help of voice prompts, so it is not at all necessary to constantly keep your smartphone in sight. Speed Camera Alerts draws information about points from the database of the popular site SCDB.info, which has information about more than 60,000 cameras around the world. However, our regions are represented rather poorly, so it is preferable to use this program when traveling abroad. I'm glad that the program can work offline, in which all the necessary data is pre-loaded.

Download in googleplay

GPS AntiRadar

Unlike the previous program, this one was developed specifically for Russia. It can run in the background without interfering with your regular navigation app, and notify you when you're approaching another stationary or mobile speed checkpoint. GPS AntiRadar draws data from its own, constantly updated database, and users have the opportunity to independently supplement it with detected radars. Thus, the program is quickly filled with new speed control points and quickly responds to their changes.

Download in googleplay

In conclusion, I would like to emphasize that the applications in this review were not created at all to help you break traffic rules. On the contrary, their reminders about speed limits once again encourage drivers to adhere to the correct driving mode and increase your safety.

Content:

Cobra TM

Before you begin setting up the Cobra TM radar detector, you must correctly install this device, ensuring its correct operation. The detector should be installed parallel to the road. You may have to bend the bracket slightly once to position the unit horizontally. It is better to install the device in the middle of the windshield of the car as high as possible, so that in places with height differences the detector is triggered as early as possible. Keep in mind that tinting can degrade the sensitivity of the device by 10-20 percent. Thus, if you have a tint strip glued to the top of the windshield, it is better to install the device lower. Also note that athermal glass with a violet tint reduces the sensitivity of any radar detector by 40-60 percent.

Most often, such glasses have a technological window that does not have any athermal properties - this is where the gadget should be installed. You can find information about this window in your machine documentation. as a rule, it is located somewhere under the rearview mirror.

You can check the windshield for athermality experimentally. Simply stand in front of an active signal source, for example, in front of a traffic police radar or automatic door sensor that operates in the K-band, and check the signal strength of the device from the car and from the street. If you notice a difference in signal strength, your glass is athermal and the low sensitivity of the radar detector is due to this.

The need to update the radar detector database

The radar detector operating system processes signals received through built-in sensors. Outdated firmware works slowly, does not recognize some locking devices, and triggers automatic door sensors in large shopping centers.

Signs of outdated firmware include:

increase in false positives;
frequent reboots and unstable operation in city or highway modes;
decreased reception range and frequent device freezes.

After the update, the device will learn to distinguish the signals of new fixation devices, the percentage of freezes will decrease, and the operation of the device in different modes will stabilize. Radar detectors with current firmware react less to automatic doors in urban environments, and the number of errors during operation decreases.

Important. The update file includes an up-to-date database that improves the accuracy of the radar detector.

How to set up a radar detector?

Video:

It is customary to configure the radar detector once, after which the selected parameters are saved in memory. Today in our country there are mainly two bands used in which police radars operate:

X - the Sokol type radar operates in this range, which has long been discontinued, but in some regions they are still found.
K-band – this is where modern speed meters operate.
Separately, we can distinguish laser radars, which do not operate in any specific range, but operate at the expense of the light wavelength, which is measured in nanometers.

There are other frequency ranges:

Ka;
Ku;
VG 2;
Specter I-IV;
POP.

Frequency ranges

These ranges are not yet used in our country, so we recommend turning them off. First of all, this will reduce the frequency of false positives. Regardless of the fact that there is no measuring equipment in such ranges in our country, triggering from other sources cannot be ruled out. The speed of the gadget's processor also increases, since it will work to recognize only certain ranges.

It should be noted that in the new Cobra radar detectors, the Ka band is enabled by default and cannot be turned off. X-band is enabled in the settings and you can disable it if necessary. Frequency ranges not used in our country are disabled by default. In other words, modern models of Cobra radar detectors are configured for use in Russia. In the factory settings, the Highway driving mode is selected - it is optimal in many cases.

In the urban mode of operation in the Cobra RU 935, 945, 955 and 745, 755 and 775 ST radar detector models, the signal strength of one and two is not announced, so we do not recommend using the mode in unfamiliar areas. City and City Max are good for cities where the cops are mostly armed with Marksmen.

How to set up and use

After installing and connecting the device to the power source (car cigarette lighter socket), they begin to configure the parameters, following all the recommendations given in the operating instructions.

The device menu consists of three submenus: setting up the radar detector—select one of the signal scanning modes (“City/Highway/Smart”). They activate one of the ranges that they are going to use, and you also need to configure the type of muting for alerts in Intego. By setting up the GPS module, all necessary actions are performed for accurate and precise operation of the device during GPS alerts.

Setting up the radar detector includes parameters such as adjusting volume and sound alerts, display brightness, quick start, etc.

In the PLATINUM settings, the developers used a useful type of alert: the activation of a radar detector when receiving signals from mobile radar systems. When turned on, the device will scan signals from tripods (this is a laser radar mounted on a tripod), of which there are quite a few that have appeared on the routes.

Using one of the “City” modes increases protection against interference, reducing false alarms, while the sensitivity of the device will be minimal.

The mode is used in cities, towns and industrial areas where there is a high level of electromagnetic fields.

The “Track” mode is recommended for use outside populated areas, while the level of sensitivity of the device is high with minimal protection from interference, which allows you to determine signal sources at the maximum possible distance. When receiving a signal from the radar complex, the radar detector plays both voice and light warnings.

When scanning a laser signal, the L symbol appears on the display, and the signal strength of the radar complex is displayed on the display in red numbers “2,3,4”.

How to use?

For the convenience of using the detector and getting the maximum result from it, you will need to get used to the gadget over a certain period of time and learn to correctly recognize information. For example, the appearance of a short and weak signal in the K-band almost certainly indicates a false positive. In this case, a stable signal almost certainly indicates radar detection.

Video:

Do not forget that in addition to police radars, other equipment operating in the above ranges has weaker radiation that the detector can trigger. These could be sensors for opening sliding doors at gas stations or in stores, power lines, cruise control in cars, cell towers, satellite dishes, etc.

To reduce the frequency of unnecessary triggering, we recommend doing the following:

Disable bands that are not used in our country.
Switch between City and Highway modes. In the first case, the received signals are coarsened and the number of false positives is reduced. In this case, the sensitivity of the sensor decreases.

To increase comfort, you can use the IntelliMute option, which is not available on all radar detectors. Setting the function makes it possible to muffle the functioning of the gadget at low speeds. These are the cases when using a detector turns out to be irrelevant. Let's say you're stuck in traffic or pulling into a shopping center where there are door sensors and you just can't speed in the parking lot.

What determines the operating range?

Cobra in the cabin

Please note that the detection range of the radar detector largely depends on factors such as:

geography of the area (winding or hilly road, lack of reflective objects and surfaces);
weather, traffic on the road.

It is impossible to determine in advance the maximum range of the antiradar, since in each specific case the combination of factors influencing the range may be different.

Also, you should not use two radar detectors at the same time, since the heterodyne background of one device can interfere with the operation of the other.

Do not bring the radar detector close to a functioning police radar - up to five meters. This is not normal for its use and the detector board may simply be damaged.

658 Version: 14.0 Android: 4.0 and higher Category: Maps Developer: AIRBITS & Reactive Phone Age: 3+ Internet: Not required Russian language: Present Updated: 9-09-2019, 10:25 GPS Anti-Radar Free

is a unique application that allows you to move on the roads by car without unnecessary problems.
With it, you will always be aware of the radars and cameras placed along the way, which today can be very often found within the city. They record exceeding the speed limit, which leads to a subsequent fine for drivers. Therefore, it is much safer to drive around the city, knowing in advance about the approach of such devices. With this program on your mobile gadget, you can always go around the area with a radar or first reduce the speed so that there is no violation of traffic rules. On today's market there are special devices with the same function as this application, but you will have to pay a considerable amount for them. And this phone application works absolutely free. The location of radars and cameras on the streets is constantly changing. Drivers may not always be able to quickly find out about current changes, but with such a program they will always have the latest information on this topic. Regularly updating the databases will protect anyone from accidentally encountering such speed monitoring devices. In addition to the main function of finding radars, the application also provides many additional tools that make the life of any driver much easier. Application Features:

convenient control;
completely Russified interface;
wide functionality;
fast warning system;
takes up little space in the phone's memory.

Advertising Download GPS AntiRadar Free for android free apk[12.96 Mb](downloads: 32018) Download from Google Play Answers to frequently asked questions See also Antiradar MapcamDroid, Radar detector Where are my children: parental control Navigator for Google Maps Go Smart Driver AntiRadar : traffic police and traffic police camera detector Autonomous maps and navigation system Waze - social navigator Yandex Transport Yandex Navigator Comments

On the roads of almost any country you can find a huge number of radars, and drivers do not always know in advance where they are. This is where a car radar detector comes in - a compact device that helps locate speed control equipment. How is it different from a radar detector, how to choose, configure or update it?

Operating principles of a radar detector

The fundamental difference between the devices is the activity of the radar detector. Prohibited by the legislation of most European countries (including Russia), the anti-radar suppresses or distorts the readings of police radar.

The principle of operation of the radar detector is clear from a simple diagram.

How is it different from a radar detector?

You need to understand the difference between a radar detector and an anti-radar.

A radar detector is an exclusively passive radio signal receiver. It does not affect the received signal in any way, but only analyzes it. This makes it possible to determine which monitoring equipment is being used. Most modern detectors can work with different types of radars, display information on the screen, and produce sound and voice signals. The detector can be used in Russia and many other countries of the world - it is not prohibited by law.

This is a real radar detector. If you live in Russia, it is prohibited to use it

How to choose a radar detector

Attention! Before making a choice, you need to find out two things:

Does your car have a thermal windshield? Athermal glass is coated with silver oxide, causing it to reflect the sun's rays. This is convenient because the interior does not become hot in hot weather, but the protective layer also prevents radio signals from entering. This means that the radar detector will not be able to detect radiation from monitoring devices. If you are not aware of the information about the windshield, inspect it - on the outside it will have a metallic tint of purple, green, orange or another color. If it is still athermal, you will have to choose a radar detector with a spaced installation type or look for an unprotected place next to the rear view mirror.

Such glass will prevent the detector from picking up signals

Does the car have adaptive cruise control, blind spot sensors, or other sources of strong radio signals? If they are present and cannot be turned off, alas, you will have to do without a radar detector, since it will receive strong interference. There are only a few jam-proof models available so far, all of which are manufactured by Escort, a world leader in radar detectors. We are talking about the Escort Passport 9500ix INTL and the 8500ci Plus INTL variant.

Frequency range

The most important parameter. Determines which radar signals the equipment will pick up. The choice depends on the area in which you move most often. Thus, the X-band is outdated and is no longer used almost anywhere except in the most “wild” places. But the K range in pulse mode is widespread. There is also a low-power K-Pulse subband - it is used in the latest Strelka, Cordon and many other radars.

Radar "Strelka". Once upon a time, these caused drivers a lot of discomfort.

A separate class of monitoring devices is laser type meters. They do not use a radio signal, but a laser beam with a certain wavelength. Such models are also often used in Russia, so it’s good if your detector can pick them up.

The most difficult thing is with the AvtoUragan, Avtodoriya and Odyssey complexes. These are not radars in the usual sense, but cameras that are installed on different sections of the road. First the car is registered on one, then on the other. Then the equipment determines the time it took to cover this section and uses it to determine the driving speed. No standard detector can detect such a device, because it does not emit anything! However, there was a solution for them as well - modern versions are equipped with a built-in database with camera coordinates. It is recommended to pay attention only to detectors that have a database.

Detector classes

Budget

The most common class. In our country, you can most often find inexpensive Russian and South Korean models. Their cost usually does not exceed 12,000 rubles. The manufacturers PlayMe, Neoline, Star Stinger, Supra, Street Storm, Sho-Me deserve trust. Some world-famous brands also have budget lines - for example, Whistler and Cobra.

Popular models are Street Storm STR 9540EX and STR 9900EX GL, as well as PlayMe Forever.

“Cheap and cheerful” - this is about this detector

Average price category

Here everything is more serious. The cost varies from 12,000 to approximately 20,000 rubles. The most famous manufacturers in this category are Street Storm, Cobra, Beltronics, Whistler and Escort. In Russia, Street Storm is the most popular because they are inexpensive and perfectly pick up signals from most local radars.

Best models: STR 9350EX, 9750EX, 7010BT, Whistler PRO-99ST+. Mid-priced radar detectors are an excellent choice for most situations.

"Strong middle peasant." Performs well on any road

Premium class

This detector costs a lot of money. But this is completely justified!

How to use a radar detector

I bought a radar detector for the price of a fancy smartphone, and I continue to receive fines.
How to use a radar detector to jam out “false ones” without missing active cameras? — Alexander P.

Alexander, there are several reasons why a radar detector may behave incorrectly. In one case this is due to incorrect installation or configuration, in another due to a software or hardware malfunction. Unfortunately, you did not indicate the brand and model of the device, so the recommendations will be general.

Correctly attaching the radar detector to the panel

This must be done so that the signal does not encounter obstacles: electromagnetic waves in the microwave range can be reflected from surfaces, but do not pass through them.

Select a point in the middle of the dashboard. Make sure your view is not restricted in any way. If the receiver rests on the frame of the windshield wipers, the sensitivity of the device will be reduced.

We install the device on the holder. The user manual will tell you how to attach the radar detector to the car panel. The delivery set includes an anti-slip mat or magnet with 3M tape.

Example 1

On an anti-slip mat

If the control panel is flat and the radar detector speaker is not located on the “belly”.

Of the minuses: the surface of the mat is velvety, so it easily collects dust. You should also not keep the rug in the sun - greasy marks will appear on the panel.

Example 2

On a magnet

If the control panel is flat and you do not have enough fixation of the holder on the windshield.

Of the minuses: double-sided tape cannot be glued a second time. Therefore there will be only one attempt.

Correctly attaching the device to the windshield

The principle is the same as with the dashboard. The detector must be mounted parallel to the road surface, avoiding obstacles that may interfere with signal reception.

Select a point on the windshield. Make sure the glass is not covered with metallic tint film. If a tinting strip is glued under the ceiling, the device must be secured lower.

We install the device on the holder in the middle of the glass and as high as possible to the ceiling. The delivery set includes suction cup mounts.

Example 3

On suction cups

If you drive in hilly areas and want to expand the signal capture field.

Of the minuses: the suction cups come off in the cold, and the bracket itself can be tight.

A radar detector for indoor installation should not restrict visibility from the driver's seat. According to Part 1 of Art. 12.5 of the Code of Administrative Offenses of the Russian Federation, a fine of 500 rubles is provided for this. or warning.
The radar detector for indoor installation is not suitable for vehicles with athermal glass. If the windows are athermal, choose a model with a remote installation, where the radar unit is installed outside under the hood. Or check the documents for the car. Such glass should have a technological window without athermal properties - usually behind the rear view mirror. You can install a radar detector within its framework.
The indoor radar detector cannot be used with a similar device at the same time. Detectors may conflict and interfere with each other's operation.

Editor's Choice

We recommend placing the detector higher towards the ceiling: this will make signal reception more stable.

Initial setup of the radar detector

It is not necessary to touch most of the factory settings, but you need to understand the functionality: especially if the detector is expensive and has its own features. The settings are set once: for subsequent trips they will be used automatically.

We start with updating the firmware. If the device produces too many false alarms, freezes or turns off the sound, a new software version is needed. Many manufacturers release updates monthly, and bugs are fixed in the new version. Updates are available on the manufacturer's website. If you update via a computer, you need a USB cable. It is not available in the basic configuration everywhere.

Checking the basic settings. These include screen brightness, alert type, response range, speed thresholds. Some models allow you to set the settings within individual modes. This is convenient if you want to synchronize the detector's operation with your personal driving style.

Disable unnecessary ranges. In Russia we are interested in: K-band and La-band. Others can be temporarily disabled so as not to load the processor - they are useful only for trips abroad in Europe and America.

Let's get acquainted with the operating modes. According to the standard, these are “City”, “Highway” and “Smart”. The latter may have a different name, but its principle is auto-correction of sensitivity taking into account the current speed. This is convenient if you don’t want to switch between “City” and “Highway” manually.

Check if your detector can prioritize the built-in camera base without disabling the K-band. If so, this mode is suitable for a city with mobile ambushes.

Editor's Choice

In most detectors, we recommend choosing the “Smart” mode, having previously set the desired speed thresholds. In the “City” mode, you can turn off the radar part and drive only according to the GPS informer database. But if there are mobile ambushes in your region, this scenario is not suitable. In the “Highway” mode, the radar part is as sensitive as possible, so the number of false alarms will increase.

Check list

How to use a radar detector correctly

Do not place the receiver in front of obstacles. Windshield wipers, bumpers and other obstructions can weaken the signal.
Do not block the driver's view. A fine may be issued for this.
Do not use with tinting or athermal windows. This results in a decrease in receiver sensitivity.
Do not use two detectors at the same time. You will cause additional interference.
Do not bring the detector closer than 5 m to an active police radar. The inside of the device may be damaged.
Update the firmware before your first trip. This way you will avoid old software errors.
Check the relevance of the database of stationary cameras (relevant for models with a GPS informer). Many manufacturers update the database weekly.
Disable bands that are not used in Russia. This will help reduce CPU load and reduce false positives.
Set up a sound notification. Based on the signal intensity, you can distinguish interference from the real camera.
Set the permissible speed threshold. If you do not exceed it, the device will not work.

Reminder before purchasing

The radar detector searches for camera traps and combats simple human inattention. Somewhere there is a new sign on the usual route, somewhere a new camera at a turn - and with the help of the detector they are in full view.

But do not forget that a guarantee of safety is responsible driving and compliance with traffic rules. If you do not follow the driving culture, any device will be useless.

If you want to set up the device with a specialist, contact a service consultant, and if you are just thinking about purchasing, look at the new models in the catalog. We will help you choose and tell you what to look for.

Where and how to install

Selecting a location

The detector must be mounted in a place from which the road is clearly visible. If you have to take your eyes off the road to look at the screen, you've chosen the wrong place.

The most common option is next to the rearview mirror. It's not bad, but it has its flaws. This setup reduces the accuracy of detecting laser beams to some extent, since most detectors can only detect laser beams within an area of about 1 m around them. If the device is at the level of the windshield, and the beam is directed towards the license plate, there simply will not be enough coverage area. Thus, if you have a large car, it is better to place the detector somewhere lower.

Installation next to a mirror is a popular, but not always correct option.

Some drivers place detectors in the middle of the windshield. This option is acceptable from a technical point of view, but it can provoke conflict among police officers - many of them do not like the presence of such a device.

It is recommended to mount the equipment at the bottom of the windshield or even on the dashboard.

A dashboard is a great choice in almost any situation.

Installation

The easiest way to attach the detector is to use the included suction cups. It is suitable if you are going to place the equipment on the windshield or other flat surface. But if you need to attach it to the dashboard, it is better to use double-sided adhesive tape.

Attention! Be careful with the tape! There are known cases where it damaged the serial number of the device, which led to the voiding of the warranty.

Connection

The process can vary greatly depending on what you intend to connect the fixture to. Just in case, have the following tools ready:

flat screwdriver;
knife or sharp scissors;
a piece of wire of medium thickness;
soldering iron

Connection to the lampshade

Using a screwdriver, unscrew the 2 screws that secure the lampshade.
Use wire to pull the cable to the side post.
Route it to the left side of the panel and attach the “original” connector.
It is recommended to take power from the orange and black wires of the lamp.

This is where you need to connect the radar detector

How to connect and configure directly

You will need an extended fuse (available at many electronics stores). The process looks like this:
Find a target in the fuse box that always has a “plus” (or it appears after the ignition is turned on).
Insert the wire with the extended fuse into the connector or solder it to the fuse leg.
Install the resulting structure into the fuse box and power it.

Extended fuse. Without it, don't even try to connect the detector directly!

Connection to ignition

“Plus” is placed on a thick wire with a black stripe, which is located on the ignition switch block.
“Minus” is on the stove stud, under the nut.
The connection is made via a fuse.
If you do not have a voltmeter, check the functionality of the interior lamp.

The main thing in this method is not to confuse “+” and “-”.

Video: connecting a radar detector in a Lada Granta car

Firmware

The update and flashing process varies greatly between models. For example, in Whistler, to determine the current software version, you need to hold down the City button for a few seconds - the numbers of interest will appear on the screen. In Sho-Me, everything is somewhat more complicated - you need to lift the lid and see what is written on the main chip.

You can update the version yourself, but you risk the warranty. You need to download the firmware for your device and upload it via your computer. However, remember that this is a rather dangerous procedure. Only representatives of the official service center can guarantee its implementation.

Once the update is complete, you need to reboot the detector. Different models do this in different ways. In some cases, you need to hold down the MENU button (or similar) and press the volume up/down buttons. See the instructions for more details.

A radar detector is a useful device, but it will only bring maximum benefit if it is correctly installed and configured. Do everything in accordance with the rules and get reliable protection from monitoring devices!

Home → Tuning →

Sources used:

https://skachat-dlya-android.ru/antiradar.html
https://lifehacker.ru/kak-ispolzovat-android-v-kachestve-antiradara-na-dorogax/
https://avtozvuk.info/kak-nastroit-antiradar-cobra-tm-pravilno.html
https://androidlomka.com/158-gps-antiradar.html
https://carnovato.ru/kak-vyibrat-radar-detektor-avtomobilnyiy/

SHARE Facebook

Previous articleTOP 7 best tablets with a keyboard: which one to buy, specifications, reviews

Next article7 best tablets under 5,000 rubles 2019

How to connect a radar detector to the ignition

After gluing the panel, I decided to move the radar detector to the corner of the glass and at the same time power it through the ignition so that the radar would automatically turn on and off. I also went to the store and bought myself new windshield blades, frameless ones, because mine were already a year and a half old, and they were starting to get dull.

Arriving at the garage, the first thing I did was change the brushes.

Next I started working on the wiring to power the radar. I disassembled the housing of the cigarette lighter connector and tore off the wires from the circuit.

I drive carefully, so I didn’t really need a radar detector. But lately he has started to get “naughty” in places (where the danger is minimal). Therefore, I decided to connect a radar detector. Why just connect? Because I had it installed since winter, but... it often fell off from its fastening point, I installed it in a previously torn place and decided to check how long it would hold.

The installation location was not chosen by chance - the upper left corner (under the sun visor). The reasons are as follows: 1) I like to listen to loud music and the cheerful trill of the radar detector cannot be heard when placed in another place; 2) Visually, the indicators are in front of your eyes, so even if you don’t hear it, you will see it - for sure!

So, the installation process: 1)

Using a wide flat screwdriver, pry up the plug and carefully pull it out. The plug is not completely removed. Then we pry up the upholstery from above with a screwdriver and, overcoming the resistance of the clamps, remove it.

Remove the left door sill trim (it is the same for the front and rear parts of the cabin). Just pull it up (the clamps there are strong). Latches are used near the central drain of the cabin (see photo).

Once again I welcome you all to the pages of my blog.